نتایج جستجو برای: rectangular abutment
تعداد نتایج: 32377 فیلتر نتایج به سال:
The aim of this study was to measure marginal fit at cylinder-abutment interface, before and after overcasting procedure. A hexagonal implant was fixed to a stainless steel base and a Estheticone-like abutment used during all the experiment. Before casting procedure, gold (Group I) and Ni-Cr-Be (Group II) premachined cylinders were tightened to the abutment with gold and titanium screws (in bot...
PURPOSE The objective of the present study was to investigate the effect on bone tissue healing patterns in 1-mm area treated in the transmucosal surface of the abutment in the tibia of rabbits. MATERIALS AND METHODS Forty-six abutments were divided into two groups: control group (CG) with 14 abutments with smooth surface and experimental group (EG) with 32 abutments presenting a 1-mm area of...
STATEMENT OF PROBLEM Ceramics are widely used for anterior restorations; however, clinical color reproduction still constitutes a challenge particularly when the ceramic crowns are used on titanium implant abutments. PURPOSE The purpose of this in vitro study was to investigate the effect of implant abutment material on the color of different ceramic material systems. MATERIAL AND METHODS F...
We revisit the far from equilibrium escape problem across a fluctuating potential barrier that is driven by asymmetric, unbiased dichotomous noise. Our closed analytical solution for arbitrary noise strengths reveals new aspects of the so-called ‘‘resonant-activation’’ effect and leads to interesting implications regarding far from equilibrium or externally controlled chemical reaction processe...
PURPOSE To compare the effect of implant abutment modification on the amount of cement extruded at the crown-abutment margin and to evaluate the vertical discrepancy after cementation. MATERIALS AND METHODS Access openings of titanium abutments were modified with an opening (open) and placement of two vent holes 3 mm from the occlusal edge and 180 degrees apart (internal vent). Access opening...
PURPOSE To evaluate the effects of different abutment geometries in combination with varying luting agents and the effectiveness of different cleaning methods (prior to re-cementation) regarding the retentiveness of zirconia copings on implants. MATERIALS AND METHODS Implants were embedded in resin blocks. Three groups of titanium abutments (pre-fabricated, height: 7.5 mm, taper: 5.7°; custom...
Purpose: Critical bending moment (CBM), the moment at which the external nonaxial load applied overcomes screw joint preload and causes loss of contact between the mating surfaces of the implant screw joint components, was measured with 2 types of implants and 2 types of abutments. Materials and Methods: Using 4 test groups of 5 implant-abutment pairs, CBM at the implant-abutment screw joint wa...
OBJECTIVE To evaluate the vertical misfit between different brands of dental implants and prosthetic abutments, with or without mechanical torque, and to study their possible combination. STUDY DESIGN Five different brands of implant were used in the study: Biofit (Castemaggiore, Italy), Bioner S.A. (Barcelona, Spain), 3i Biomet (Palm Beach, U.S.A.), BTI (Alava, Spain) and Nobel Biocare (Göte...
PURPOSE To evaluate, in vitro, the leakage observed in internal hexagon and Morse taper implant-abutment connections. MATERIALS Ten specimens with internal hexagon and 10 with Cone Morse connection were used. The inner parts of 5 implants, per group, were inoculated with Pseudomonas aeruginosa (PS) suspension and 5 implants, per group, with Aggregatibacter actinomycetemcomitans (AA). The pene...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید