It is observed that, reinforced concrete beams failed due to flexure but in case of deep beam failure occur due to shear. Deep beams may be defined as the beam where shear span to depth ratio less than 2. A number of researchers already proposed various approach to predict the ultimate strength of deep beams. In this study a newer approach is developed to calculate the ultimate shear strength o...

Accepting the challenge of the future in the field of civil engineering smart structure applications, the province of Manitoba is undertaking the responsibility of constructing the first bridge in Canada totally prestressed and reinforced for shear by cru:bon fibre reinforced plastic (CFRP) reinforcement. Portion of the concrete deck slab is also reinforced exclusively by FRP reinforcements. Th...

In the present study, a new method for retrofitting reinforced concrete beam is introduced in which steel-concrete composite jackets containing steel fiber is used. For this purpose, 75% of the peripheral surface of reinforced concrete beams was initially reinforced using steel plates and bolts, and steel fiber reinforced concrete was used between the steel plates and the peripheral surfaces of...

In moment resisting reinforced concrete framed buildings, corner joints are found at the roof level. These joints, if designed for gravity loads and are based on pre-seismic codes, may suffer substantial damage during earthquakes particularly under opening cycles, i.e. those causing flexural tension on the inside of the joint. Several techniques of repair and strengthening of reinforced concret...

This paper presents two shear tests of -in. diameter cast-in anchors embedded in the plastic hinge zone of reinforced concrete columns. Design codes, such as ACI 318-14, require special reinforcement for concrete anchors in concrete that could be substantially damaged during an earthquake. The test anchors in this study were equipped with the anchor reinforcement recommended and verified in the...

Code design of unreinforced masonry (URM) brick buildings is based on elastic analysis, which requires as input, among others, estimates of the in-plane drift capacity at the considered limit states. Current approaches assess the drift capacity of URM walls by means of empirical models with most codes relating the drift capacity to the failure mode and wall slenderness. Comparisons with experim...

abstract to resist lateral loads in concrete buildings, usually systems such as flexural frame, shear wall or their combinations are used. using x form of cable bracing in order to strengthen concrete buildings is a new method. this system is more economical compared with the other systems due to cables low weight, high tensile resistance, easy performance and less maintenance problems. in this...