For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...

PURPOSE Patient-specific dosimetry of lutetium-177 ((177)Lu)-DOTATATE treatment in neuroendocrine tumours is important, because uptake differs across patients. Single photon emission computer tomography (SPECT)-based dosimetry requires a conversion factor between the obtained counts and the activity, which depends on the collimator type, the utilized energy windows and the applied scatter corre...

Proton radiography and tomography have long promised benefit for proton therapy. Their first suggestion was in the early 1960s and the first published proton radiographs and CT images appeared in the late 1960s and 1970s, respectively. More than just providing anatomical images, proton transmission imaging provides the potential for the more accurate estimation of stoppingpower ratio (SPR) insi...

An optical fiber sensor based on surface plasmon resonance (SPR) is proposed for monitoring the thickness of deposited nano-thin films. A side-polished multimode SPR optical fiber sensor with an 850 nm-LD is used as the transducing element for real-time monitoring of the deposited TiO2 thin films. The SPR optical fiber sensor was installed in the TiO2 sputtering system in order to measure the t...

The application of surface plasmon resonance (SPR) measurements to the study of ultrathin organic and inorganic films adsorbed onto gold surfaces utilizing nearinfrared (NIR) excitation from 800 to 1152 nm is described. SPR scanning angle measurements of film thickness are demonstrated at 814 and 1152 nm using lowpower diode and HeNe laser sources, respectively. Several advantages of SPR in the...

To more easily estimate accurate values of collimator scatter facor, S(c), we suggest a two-component saturation model that accounts for scatter from the primary collimator and flattening filter and from the collimator jaws. This model, which assumes an exponential distribution of scatter intensity, was tested by in-air measurements using a mini-phantom for 4 MV and 10 MV X-rays of a Clinac 210...

In this study we proposed a new surface plasmon resonance (SPR) configuration for enhancement of biosensor sensitivity with high absorbing molecules on the sensor surface. The proposed SPR structure consists of a germanium nanowires grating coated with three graphene layers while the addition of titanium layer between gold and fused silica (substrate) prevents the gold oxidation. For transverse...

A surface plasmon resonance (SPR) sodium ion sensor using an ion optode membrane film was experimentally and theoretically described based on an absorption-based SPR principle proposed in our previous article (Kurihara, K; Suzuki, K. AnaL Chem. 2002, 74, 696-701). The sodium ion concentrations from 10(-6) to 10(-1) have been successfully determined not only by the resonance angle diagnosis of t...

Studies on cultured cells have shown that agonists induce several types of G protein-coupled receptors to undergo internalization. We have investigated this phenomenon in rat striatum, using substance P (SP)-induced internalization of the SP receptor (SPR) as our model system. Within 1 min of a unilateral striatal injection of SP in the anesthetized rat, nearly 60% of the SPR-immunoreactive neu...