In this study, optimization is carried out to find the optimized design of a foam-filled column for the best Specific Energy Absorption (SEA) and Crush Force Efficiency (CFE). In order to maximize SEA, the optimization gives the value of 2.3 for column thickness and 151.7 for foam length. On the other hand to maximize CFE, the optimization gives the value of 1.1 for column thickness and 200 for...

This paper is focused on using foam concrete as structural element in polymer-concrete composite plate girders. Trial mixes of foam concrete and different proportions of foam agent were considered to obtain the suitable mix that can be used as structural element in composite girders system. Details of the experimental investigations on foam concrete precast slabs and polymer-concrete composite ...

We use a rigid axisymetric microfluidic flow focusing device to produce monodisperse bubbles, dispersed in a surfactant solution. The gas volume fraction of the dispersion collected out of this device can be as large as 90%, demonstrating that foam with solid-like viscoelastic properties can be produced in this way. The polydispersity of the bubbles is so low that we observe crystallization of ...

In this note we study the correspondence between the " relativistic spin foam " model introduced by Barrett, Crane and Baez and the so(4) Plebanski action. We argue that the so(4) Plebanski model is the continuum analog of the relativistic spin foam model. We prove that the Plebanski action possess four phases, one of which is gravity and outline the discrepancy between this model and the model...

The expansion of molten aluminum foam was studied to determine flow mechanisms in the cellular melt. The structure of the foaming melt evolved through a series of deformation stages before the foam stabilized and solidified. Changes in cell geometry during foam expansion were observed at different positions within the mold cavity and analyzed to determine flow mechanisms. The deformation patter...

An instrument was designed and assembled with the aim of measuring macroscopic properties of foams ~such as foamability and stability! under high pressures and moderate temperatures ~up to 105 bar and 425 K, respectively!. The device makes use of infrared sensors to detect the foam forefront position as it is generated by gas sparging in the foaming solution. The measurement makes use of a modi...

The objective of this study was to examine whether native low-density lipoprotein (LDL) induces foam cell formation by macrophages and to examine the effect of lipopolysaccharide (LPS) on native LDL-induced foam cell formation by macrophages in vitro. RAW 264.7 cells were cultured with LDL or high-density lipoprotein (HDL) in the presence of LPS derived from Aggregatibacter actinomycetemcomitan...

BACKGROUND FGF21,as a member of the fibroblast growth factor superfamily, is an important endogenous regulator to systemic glucose and lipid metabolism. Elevated serum FGF21 levels have been reported in subjects with coronary heart disease and carotid artery plaques. The formation and apoptosis of foam cell, induced by ox-LDL and oxysterols, are key steps in the development of atherosclerosis. ...

The response of a reticulated, elastomeric foam filled with colloidal silica under dynamic compression is studied. Under compression beyond local strain rates on the order of 1 s 1, the non-Newtonian, colloidal silica-based fluid undergoes dramatic shear thickening and then proceeds to shear thinning. In this regime, the viscosity of the fluid is large enough that the contribution of the foam a...

Aluminum foam is usually used as the core of composite materials by combining it with dense materials, such as in Al foam core sandwich panels and Al-foam-filled tubes, owing to its low tensile and bending strengths. In this study, all-Al foam-filled tubes consisting of ADC12 Al-Si-Cu die-cast aluminum alloy foam and a dense A1050 commercially pure Al tube with metal bonding were fabricated by ...