The use of raw sawdust, RSD, of locust bean tree (Parkia biglobosa), a low-cost, locally available agroforestry waste as an adsorbent for removing a ternary mixture of heavy metals comprising of copper, lead and nickel (TMS) from aqueous solution was examined. Equilibrium data obtained from batch adsorption experiments were analysed with Langmuir, Freundlich and Temkin isotherm models, with Lan...

Batch adsorption of recalcitrant melanoidin using the abundantly available coal fly ash was carried out. It had low specific surface area (SBET) of 1.7287 m2/g and pore volume of 0.002245 cm3/g while qualitative evaluation of the predominant phases in it was done by XRD analysis. Colour removal efficiency was found to be dependent on various factors studied. Maximum colour removal was achieved ...

The sorption behaviour of three perfluoroalkyl substances (PFASs) (perfluorooctanesulfonic acid (PFOS), perfluorooctanoic acid (PFOA) and perfluorobutanesulfonic acid (PFBS)) was studied in sewage sludge samples. Sorption isotherms were obtained by varying initial concentrations of PFOS, PFOA and PFBS. The maximum values of the sorption solid-liquid distribution coefficients (Kd,max) varied by ...

Distribution coefficients (K(d) values) describe contaminant partitioning between liquids and solids for linear sorption at equilibrium conditions. If experimentally-determined K(d) values do not represent sorption equilibria, errors are introduced in contaminant transport models. These errors may be further propagated when K(d) values are used to compare contaminant mobility under different ch...

The application of rice straw-derived biochar for removing nitro explosives, including 2,4-dinitrotoluene (DNT), 2,4,6-trinitrotoluene (TNT), and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), from contaminated water was investigated through batch experiments. An increase in the pyrolysis temperature from 250 to 900°C in general led to higher pH, surface area, cation exchange capacity (CEC), po...

A batch sorption process for removal of ammonium ions from aqueous solution using natural zeolite was studied. Tree different particle sizes of zeolite (1-2 mm, 2-4 mm and 4-10 mm) were used in the experiments. Sorption of ammonium ions on natural zeolite were carried out at 298 K with the initial concentrations of ammonium in the range of 1000 – 7000 mg NH4 -N/dm. Equilibrium data were fitted ...

−Singleand bi-solute sorption and desorption of 2-chlorophenol (2-CP) and 2,4,5-trichlorophenol (2,4,5TCP) in montmorillonite modified with hexadecyltrimethyl-ammonium (HDTMA) were investigated by sequential sorption and desorption. Effect of pH on the sequential sorption and desorption was investigated. As expected by the magnitude of octanol : water partition coefficient (K ow ), both sorptio...

Inorganic phosphate may influence the adsorption of glyphosate to soil surface sites. It has been postulated that glyphosate sorption is dominated by the phosphoric acid moiety, therefore, inorganic phosphate could compete with glyphosate for surface sorption sites. We examine sorption of glyphosate in low organic carbon systems where clay minerals dominate the available adsorption sites using ...

Studies of the effects of sulfide poison on H sorption into Pd can be conducted without the complications of processes involved in cathodic H2 evolution since UPD H can be generated as the initial chemisorbed source of H below the H2 reversible potential, unlike the situation at e.g. Fe, mildsteel, Ni, Ti, etc. By means of a previously developed kinetic fitting procedure, the effects of S and H...

The bioavailability and ultimate fate of heavy metals in the environment are controlled by adsorption-desorption process. Batch equilibrium experiments were performed to assess the effects of pH and low molecular weight organic acids (LMWOAs) on competitive adsorption and desorption of cadmium and lead in paddy soils from China. The results indicated that both soils exhibited greater sorption c...