Two virtual sensors are proposed that use the spark-plug based ion current sensor for combustion engine control. The first sensor estimates combustion variability for the purpose of controlling exhaust gas recirculation (EGR) and the second sensor estimates the pressure peak position for control of ignition timing. Use of EGR in engines is important because the technique can reduce fuel consump...

Air path control of a spark ignition engine without an EGR loop, equipped with variable-valve-timing (VVT) actuators, is addressed in this paper. VVT devices are used to produce internal exhaust gas recirculation, providing beneficial effects in terms of fuel consumption and pollutant emissions reduction. However, VVT actuators affect the fresh air charge in the cylinders. This has an impact on...

We examine a simple, fuel-air, model of combustion in spark ignition (si) engine with indirect injection. In our two fluid model, variations of fuel mass burned in cycle sequences appear due to stochastic fluctuations of a fuel feed amount. We have shown that a small amplitude of these fluctuations affects considerably the stability of a combustion process strongly depending on the quality of a...

We examine a simple, fuel-air, model of combustion in spark ignition (si) engine with indirect injection. In our two fluid model, variations of fuel mass burned in cycle sequences appear due to stochastic fluctuations of a fuel feed amount. We have shown that a small amplitude of these fluctuations affects considerably the stability of a combustion process strongly depending on the quality of a...

In order to detect knock in spark ignition engines, usually structure-borne sound signals measured by acceleration sensors mounted on the engine housing are analyzed. Earlier investigations have shown that using linear, time variant filtered structure-borne sound signals as approximated pressure signal instead improves knock detection significantly. But this method is computationally too expens...

This paper describes an investigation in which a fuzzy control paradigm was applied to a small spark-ignition gasoline-fuelled internal-combustion engine, to achieve regulation of the fuel injection system. The control system determined the amount of fuel required from a fuzzy algorithm that used the engine speed and manifold air pressure as input values. The parameters of the fuzzy system cons...

A Large-Eddy Simulation of several cycles of a spark-ignition engine with port fuel injection has been performed. The investigated engine is a modified Rotax-engine with one cylinder and four valves, built and measured (Heidenreich, Private communication) by the Institute of Reciprocating Engines of the University of Karlsruhe (IFKM). A recently modified (Magagnato et al., 2008) progress variab...

During the intake process, working volume of cylinder is filled with a fresh charge. As noted, charge consists air in diesel engine, and engines ignition from an electric spark (gasoline carburetor or gasoline fuel injection, as well gas) – mixture vapors light combustible gas.

Exhaust Gas Recirculation (EGR) concept is the most simple and Abstract more economical method for NO pollutant reduction in spark ignition engines. However, when the higher amount of the EGR gas enters into the engine, the power, torque and fuel economy of the engine decrease. One effective solution for reduction of undesirable effect of this method is to use cooled EGR, that results in more r...

In this paper we consider signal processing algorithms for detecting knock, i.e. auto-ignition of unburned fuel, in spark-ignited engines. To operate an engine with optimal efficiency, there is a need to operate close to the knock limit. This motivates the need for efficient knock detection algorithms that not only indicates knock, but also gives estimates on knock timing and size. The proposed...