A new method to generate large scale and highly dense nanoholes is presented in this paper. By the pulsed laser irradiation under water, the hydrogen etching is introduced to form high density nanoholes on the surfaces of AISI 4140 steel and Ti. In order to achieve higher nanohole density, laser shock peening (LSP) followed by recrystallization is used for grain refinement. It is found that the...

This paper presents investigations on hard turning with variable edge design PcBN inserts. Turning of hardened AISI 4340 steel with uniform and variable edge design PcBN inserts is conducted, forces and tool wear are measured. 3D finite element modelling is utilized to predict chip formation, forces, temperatures and tool wear on uniform and variable edge micro-geometry tools. Predicted forces ...

This paper presents the three dimensional (3D) finite element analysis to predict the workpiece displacement amplitude and tool wear in face turning of AISI 1040 steel under dry machining condition. 3D vibration induced turning models have been developed and validated by comparing with experimental results so as to identify the correlation. Extensive experimentation and investigators carried ou...

The in-process monitoring and real-time control of the penetration depth during laser welding is evaluated. An optical collimator collects the optical emission for measurement with a fast spectrometer. The sensor data are used to calculate the electron temperature and subsequently to determine the weld quality of overlap welds in AISI 304 stainless steel sheets performed both with CW Nd:YAG and...

Microscopic methods usable for sample surface imaging and subsequent qualitative and quantitative evaluation of platelet adhesion to the surface of the biomaterial studied were compared. It was shown, making use of the samples of medical steel (AISI 316L), that such tools as surface imaging with scanning electron microscopy (SEM), glutaraldehyde induced fluorescence technique (GIFT) and metallu...

Micro Electric Discharge Machining is a nontraditional machining process which can be used for drilling micro holes in high strength to weight ratio materials. This present research study deals with the single optimization of micro EDM process using Genetic Algorithm. Mathematical models using Response Surface Methodology (RSM) is used to correlate the response and the parameters. The desired r...

In this paper, the nucleation and growth of diamond/diamond-like coatings on austenitic (AISI 316) and ferritic (AISI 430) stainless steel substrates have been investigated using torch technique. The effects of substrate surface preparation has also been studied. The quality of coatings produced has been examined using optical and scanning electron microscopy, X-ray diffraction, Raman spectros...

The present work has been carried out to study the sensitization behavior of AISI 304L austenitic stainless steel weld, fabricated using GTAW (gas tungsten arc welding process). This weld was subjected to post weld thermal aging (PWTA) treatments lying in the sensitization range, viz. 700 ?C for 30 minutes, 500 minutes and 1000 minutes for studying the influence of carbide precipitation on thei...

Electrochemical noise data is commonly used to monitor corrosion of metals in various environments. In this work we use recurrence plots to study electrochemical noise time series of stainless steel AISI 316 samples immersed in mildly corrosive electrolyte. It has been found that current and potential time series reveal different information. Recurrence quantification analysis of current time s...