We have developed the new hybrid structure of CLT infill and steel frame for middle-rise high-rise buildings. This structural system can achieve high potential panel by holding around with frame. Steel support sustained load a building without panels build long-span beams reasonably. Compression stress seismic be transmitted to upper bottom through strength mortal layer, secure shear as boundar...

In most cases, structural engineers assume a concrete floor to be a rigid diaphragm. Although this simplification is in most cases acceptable, it should be noted that such an assumption may be distrusted due to certain problems. Concrete structures with staggered shear walls are among those whose analysis should be conducted with special concern for the behavior of their floor diaphragms. Howev...

Many studies on structural topology optimization of steel plate shear walls have been conducted. However, research using the bidirectional evolutionary method is limited. Accordingly, this study optimized stiffening effect (SPSWs) based method. A finite element model SPSW was established Abaqus software through “sandwich” modeling An region expanded into two regions. As targets, SPSWs with diff...

Recognizing that steel fibers can supplement the brittle tensile characteristics of concrete, many studies have been conducted on the shear performance of steel fiber reinforced concrete (SFRC) members. However, previous studies were mostly focused on the shear strength and proposed empirical shear strength equations based on their experimental results. Thus, this study attempts to estimate the...

In most cases, structural engineers assume a concrete floor to be a rigid diaphragm. Although this simplification is in most cases acceptable, it should be noted that such an assumption may be distrusted due to certain problems. Concrete structures with staggered shear walls are among those whose analysis should be conducted with special concern for the behavior of their floor diaphragms. Howev...

The concept of spraying thick layer of polymer material onto metal plate has recently received considerable interest in many civilian and military applications. There are numerous analytical and numerical solutions for single thin plates (membrane) made of either a steel or an elastomer. However, solutions for composite plate made of both of the above constituents are lacking. The objective of ...

This paper compares the measured lateral load behavior of a 0.4-scale “hybrid” precast concrete wall test specimen with the behavior of a second precast specimen designed to emulate monolithic cast-in-place reinforced concrete shear walls. Both walls have the same overall geometry and are constructed by placing rectangular wall panels across horizontal joints. The lateral resistance at the join...

Passively damped bracing systems in steel frames, in which the conventional materials of the joint are replaced by high damping viscoelastic materials, have the potential of being effective practical means for passive vibration control of dynamically loaded civil engineering structures. However, this potential can be realized only if the associated structural penalties are reduced within accept...