Plastic deformation of ARMCO iron processed by ECAP up to a maximum equivalent strain of sixteen (i.e., 1, 4, 8, and 16 ECAP passes) following route Bc was investigated by analyzing its microstructure and the stress-strain curves obtained after tensile tests at different levels of deformation. Three values of deformation (two in the plastic region taking into account the modified Crussard-Jaoul...

The stress distribution in torsionally deformed cylindrical polycrystalline copper samples was investigated. The strain in torsional deformation changes with distance from the torsional axis and thus the local extent of work hardening and consequently the local flow stress changes as well. The variation of the flow stress with radial position in the samples was measured by microhardness tests. ...

In the present work, forming limit diagrams and strain distribution profile diagrams for extra deep drawing steel at room and elevated temperatures have been determined experimentally by conducting stretch forming experiments by using designed and fabricated warm stretchforming tooling setup. With the help of forming Limit Diagrams (FLDs) and strain, distribution profile diagrams the formabilit...

We studied the role of nitrogen content on the stress-strain response of Hadfield steel (HS) single crystals under compressive loading. Two different nitrogen concentrations were examined for each orientation (0.05 wt pct and 1.06 wt pct) with drastic increase in critical resolved shear stresses (CRSSs) and strain-hardening coefficients compared to HS without nitrogen. The stress-strain respons...

A system of four coupled rate equations for the development of the densities of mobile and redundant dislocations and of mobile and immobile disclinations with time or strain is proposed to describe the microstructure evolution up to large strains. The densities of redundant dislocations and of immobile disclinations are connected to ow stress contributions with the help of Mughrabi's composite...