Interest in natural fiber polymer composite has increased worldwide due to their low cost, low density and good thermal resistivity. Sisal fiber is used as reinforced in mat form and epoxy as matrix in this composite. In present work, thermogravimetric analysis and fracture behavior of composites were studied. The percentage mass loss and physical changes of composite was observed through furna...

In this work, the flatband voltage shift of SiO2 embedded with silicon nanocrystal (nc-Si) annealed at different annealing temperature, different annealing time and under different temperature ramping rates are being investigated. The Si-ions are implanted into the SiO2 with very low energy. The instability of the flatband voltage shift is due to fact that there are remaining Si ions in the SiO...

ally produced organic material and its majority is used in the production of polymers and derivatives. Between a variety of processes the thermal cracking of hydrocarbons in the presence of steam (steam cracker) is mostly used. Regardless of the process type, all plants require process analytical equipment to collect reliable and accurate process data for process control, product quality, and p...

This booklet provides an introduction to the concepts of Differential Scanning Calorimetry (DSC). It is written for the materials scientist unfamiliar with DSC. The differential scanning calorimeter (DSC) is a fundamental tool in thermal analysis. It can be used in many industries – from pharmaceuticals and polymers, to nanomaterials and food products. The information these instruments generate...

While spacecrafts experience temperatures from -120 to 110°C on the orbit, their surface reaches extremely high temperatures, well above 1000 °C, during descent into the atmosphere due to aerodynamic heating. Sophisticated insulation systems are designed for thermal protection. One of the steps in designing a protection system is experimental temperature measurements. Neutron flux induces point...

Abstract— This paper presents a method to evaluate the reaction rate coefficient, the pore diffusivity and the thermal conductivity of the lime layer in the decomposition of limestone of various origins with an analytical solution, based on the shrinking core model. Long cylindrical limestone samples with diameters greater than 20 mm were prepared and thermally decomposed in a chamber furnace ...

The rapid thermal processing (RTP) technique features dynamic control of temperature, which permits high heating and cooling rates that cannot be reached with conventional furnace treatments. In recent years, RTP has been increasingly applied to the processing of magnetic materials. The controllable heating profiles provide an approach for the deliberate construction of materials structure via ...

Dehydration behavior gives a hint about thermal properties of materials. It is important for the usage areas and transportation of minerals. Magnesium borates can be used as additive materials in areas such as in the production of superconducting materials, in the composition of detergents, due to the content of boron in the friction-reducing additives in oils and insulating coating composition...

In reactor furnace, due to high temperature and high pressure, data can be measured only near the furnace wall. In this paper, the way to estimate temperature distribution in a reactor furnace using measured data near the furnace walls and to control temperature distribution to the desired temperature distribution was studied. In the estimation, SQP method is employed using measured data near t...