نتایج جستجو برای: thermal deformation
تعداد نتایج: 285446 فیلتر نتایج به سال:
The deformation behavior of homogenized Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr alloy has been studied by a set of isothermal hot compression tests, which were carried out over the temperature ranging from 350 °C to 450 °C and the strain rate ranging from 0.001 s-1 to 10 s-1 on Gleeble-3500 thermal simulation machine. The associated microstructure was studied using electron back scattered diffraction (EBSD)...
This paper deals with the effects of friction material properties on thermoelastic instability (TEI) and the associated dominant deformation mode. Both analytical and finite element models are constructed for determining the variation of the critical speed and the dominant TEI mode. Some important factors, e.g. the nonconductive friction material as well as the symmetric and anti-symmetric TEI ...
Recently, the acceptance of micro electromechanical systems (MEMS) technology is growing in various areas such as medical, optical, automobile and telecommunication. In realizing the needs in MEMS, techniques derived from mechanical engineering plays an essential role in the determination of geometric design variables and process parameters, experiments in fabrication and the elastic and plasti...
As a representative advanced imaging technique, the digital image correlation (DIC) method has been well established and widely used for deformation measurements in experimental mechanics. This methodology, both 2D and 3D, provides qualitative and quantitative information regarding the specimen’s non-uniform deformation response. Its full-field capabilities and non-contacting approach are espec...
Welding-induced deformation not only negatively affects dimension accuracy but also degrades the performance of product. If welding deformation can be accurately predicted beforehand, the predictions will be helpful for finding effective methods to improve manufacturing accuracy. Till now, there are two kinds of finite element method (FEM) which can be used to simulate welding deformation. One ...
The thermal shield (TS) system of ITER plays the role of reducing thermal loads to the cold structures that operate at 4.5 K. This paper presents the results of the detail design of TS, which are the design of joints, design of cooling panels. The results of structural analysis and thermal analysis to support the detail design are also reported. The detailed design of joints is done to satisfy ...
An experimental test was carried out to explosively clad solution annealed Inconel 718 superalloy on quench-tempered AISI H13 hot tool steel. A wavy with vortices interface geometry was obtained from this experiment. A gradual change in the wavelength along the direction of welding was observed which was due to a change in the impact angle, following the plate contacts. In this paper, the exper...
The sharp temperature changes in nature (e.g., forest fires, ice, and snow) can cause mechanical damage to trees and bamboo. The mechanical properties of Mongolia Scotch pine (Pinus sylvestris L. var. mongolica) and Moso bamboo (Phyllostachys edulis) were investigated by a three-point bending test with a repeated thermal shock process (i.e., sudden changes of temperature). The experimental resu...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید