Carbon fiber reinforced polymer materials (CFRP) cause CFRP to bend or fail when subjected external loads impacts. In the case of static three-point bending, using conductive properties carbon inside CFRP, overall damage detection and failure prediction can be carried out by electromagnetic methods. The eddy current coil is used realize real-time monitoring damage, measured voltage value mapped...

UNLABELLED The relationship between orthodontic force and friction produced from an archwire and brackets affects the sliding of the wire in the leveling stage. OBJECTIVE The purpose of this study was to evaluate the relationship between force and friction in a small esthetic nickel-titanium (Ni-Ti) wire. MATERIAL AND METHODS Five esthetic wires (three coated and two plated) and two small, ...

OBJECTIVE To evaluate the mechanical properties of the Polyaxial Advanced Locking System (PAX) in screw push-out and four-point bending. MATERIALS AND METHODS Screw push-out: PAX locking screws were applied to first generation PAX plates at three different insertion angles with two different insertion torques. A load was applied parallel to the screw axis, and screw push-out force was measure...

Applications of ceramic materials usually involve thermal stresses that can reduce their lifetime considerably. One of the most relevant mechanical properties for evaluating thermal shock damage resistance is the energy of fracture. In order to obtain this property, a stable crack growth regimen must be achieved throughout the test. In this paper, three-point bending tests are analyzed to deter...

The bending and growth characteristics of large fresh stems from four silver fir (Abies alba Mill.) and three Norway spruce (Picea abies (L.) Karst.) trees were studied. Twenty logs taken from different stem heights were subjected to four-point bending tests. From the bending test records, we calculated stress-strain curves, which accounted for detailed log taper, shear deformation and self wei...

For many years, fibre cemboard has been widely used in the construction industry. This material advantages, including a long-life span, ease of installation and low maintenance, which can reduce cost maintenance. However, due to its limitation being unable support heavy loads, it is only suitable for lightweight floor system. Therefore, panel introduced. Basically, consists several layers that ...

Introduction: This study aimed to devise customized fixtures for the evaluation of three-point bending strength (TPBS) of resin-based dental composites (RBCs). Materials and Methods: A cube-shaped jig made out of wood with dimensions of 105×105×101 mm was prepared in this study. A 20-mm-diameter hole was made in the center of the wooden jig. In addition, a stai...