In the present study EP142-C510-50 woven carbon fiber composite was investigated from structural/ mechanical point of view aiming manufacturing parts for aeronautical industry. The composites were obtained by hand lay-up process. Prior to mechanical tests, the cure reaction results of composite resins specimens were analyzed by using DSC technique. The EP142 epoxy matrix was cured/polymerized a...

The study of the mechanical interaction among the host, interface, and a device embedded within a laminated composite is important. Embedding micro-sensors in composite laminates produces material discontinuity around the inclusions. This in turn produces stress concentrations at or near the inclusions. Both 2D plane strain and 3D FEM models are developed to analyze the stress/strain state surr...

Two polyimide-matrix systems were subjected to a series of hygrothermal aging experiments at various temperatures and relative humidities. For each aging condition, we measured the microcracking fracture toughness as a function of aging time. The toughness decreased with time. The rate of decrease increased with temperature and relative humidity. All experimental results could be fit to a simpl...

Hole drilling operations are common in fibre reinforced plastics FRP’s to facilitate fastener assembly to other parts in more complex structures. As these materials are non-homogeneous, drilling causes some damages, like delamination, for example. Delamination can be reduced by a careful selection of drilling parameters, drill material and drill bit geometry. In this work two types of laminates...

Fibre composites are being used in various applications from aerospace, military, marine boats and submarine to renewable energy generation. Higher energy demands across the developed and growing world for the usage and replacement of conventional materials with polymer composite materials for engineering applications which is always questioned by the end user, unless the research oriented reli...

This paper presents a multilayered/multidirector and shear-deformable finite-element formulation of shells for the analysis of composite laminates. The displacement field is assumed continuous across the finiteelement layers through the composite thickness. The rotation field is, however, layerwise continuous and is assumed discontinuous across these layers. This kinematic hypothesis results in...

In this research, the mutual influence of mechanical properties and geometric parameters on thermal stress distribution in symmetric composite plates with a quasi-rectangular hole subjected to uniform heat flux is examined analytically using complex variable technique. The analytical solution obtained based thermo-elastic theory Lekhnitskii’s method. Furthermore, by employing suitable mapping f...

Despite the benefits of composite structures, it is only recently that the main load bearing structures in large aircraft such as the Boeing 787 and Airbus A350 have started to be manufactured using carbon fibre composites. Even then, the unique directionality properties of composite laminates and design possibilities have yet to be exploited to improve the aircraft performance. In this study a...

A recent variational mechanics analysis gives the energy release rate due to the formation of a new microcrack between two exisiting microcracks (John A. Nairn, J. Comp. Mat., 23, 1106 (1989)). This analysis has been useful in providing fracture mechanics interpretation of matrix microcracking in cross-ply laminates. This paper describes using the new energy relase rate analysis for a fracture ...