Rheological characteristics of Al2O3, CuO and TiO2 nano particles were investigated in oil asthe base fluid at 1 and 2 wt.%. Constitutive relations for non-Newtonian fluid were discussedbased on the power-law model. Measured viscosities of each nanofluid were used to evaluatethe power-law and consistency index. Results indicated that the nanofluid viscosity decreasedby increasing the concentrat...

As the fossil fuels are depleting continuously, we know that solar energy harvesting is a significant potential area for new research dimensions. Sun provides us about 1.9 x 10 8 TWh/yr on the land, of which 1.3 x 10 5 TWh]/yr energy is used. In order to make much use of solar energy on the earth, solar energy harvesting into more usable form (e.g. heat or electricity) by using solar energy col...

In this paper, overall heat transfer coefficient and friction factor of water based γ-Al2O3 nanofluid in a double tube counter flow heat exchanger have been measured experimentally under turbulent flow condition. For better dispersion of γ-Al2O3 nanoparticles in distilled water, magnetic stirrer and ultrasonic vibrator (with a power of 240 kW and frequency of 35 kHz) were implemented. The stabi...

Using a unique, near-field microscopy technique, fringe patterns and nanoparticle motions are visualized immediately following a nanofluid droplet deposition on a glass substrate in which an air bubble is entrapped. The nanofluid consists of DI-water, 0.10% Aluminum Oxide nanoparticles with an average diameter of 50 nm, and 0.0005% yellow-green polystyrene fluorescent particles of 1 μm diameter...

In this article, laminar flow-forced convective heat transfer of Al2O3/water nanofluid in a triangular duct under constant wall temperature condition is investigated numerically. In this investigation, the effects of parameters, such as nanoparticles diameter, concentration, and Reynolds number on the enhancement of nanofluids heat transfer is studied. Besides, the comparison between nanofluid ...

In this work we have demonstrated a facile formation of CuO nanostructures on copper substrates by the oxidation of copper foil in ethylene glycol (EG) at 80 °C. On immersing a prepared CuO film into a solution containing 0.1 g Zn(acac)₂ in 20 mL EG for 8 h, ZnO flower-like microstructures composed of hierarchical three-dimensional (3D) aggregated nanoparticles and spherical architectures were ...

In this paper a new equation for calculating the nanofluid viscosity by considering the Brownian motion of nanoparticles is introduced. The relative velocity between the base fluid and nanoparticles has been taken into account. This equation presents the nanofluid viscosity as a function of the temperature, the mean nanoparticle diameter, the nanoparticle volume fraction, the nanoparticle densi...

nanofluid is a new class of heat transfer fluids engineered by dispersing metallic or non-metallic nanoparticles with a typical size of less than 100 nm in the conventional heat transfer fluids.this article aims to investigate the overall and convection heat transfer coefficient and nusselt number of al2o3-water nanofluid flowing in a horizontal double pipe heat exchanger under turbulent flow (...