An inhalation exposure system, consisting of an inhalation chamber and an generating and feeding device for welding fumes and gases with a welding robot, was constructed and examined for its application to experimental toxicology for ventilatory responses of conscious rats to welding fumes and gases. The exposure system allowed an inhalation of fresh welding fumes and gases, and could supply ai...

Friction stir welding (FSW) is a new and promising welding process that can produce low-cost and high-quality joints of heat-treatable aluminum alloys because it does not need consumable filler materials and can eliminate some welding defects such as crack and porosity. In order to demonstrate the friction stir weldability of the 2017-T351 aluminum alloy and determine optimum welding parameters...

Process identification in the field of resistance spot welding can be used to improve welding quality and to speed up the set-up of a new welding process. Previously, good classification results of welding processes have been obtained using a feature set consisting of 54 features extracted from current and voltage signals recorded during welding. In this study, the usability of the individual f...

Metal arc welding ranges from primitive (manual) to increasingly complex automated welding processes. Welding occupies 1% of the labour force in some industrialised countries and increasing knowledge of health risks, necessitating improved assessment strategies and controls have been identified by the International Institute of Welding (IIW), ILO, WHO and other authoritative bodies. Challenges ...

Welding is a major industrial process used for joining metals. Occupational exposure to welding fumes is a serious occupational health problem all over the world. The degree of risk to welder's health from fumes depends on composition, concentration, and the length of exposure. The aim of this study was to investigate workers' welding fume exposure levels in some industries in Jeddah, Saudi Ara...

Industries involved in surfacing operations use various fusion welding especially arc welding processes. These operations demand high deposition rates but at low penetration values in the base metal. Conventional SAW, besides its high deposition characteristics, employs high values of welding current and is not many times favoured for surfacing due to high degree of dilution of surfacing alloys...

The knowledge base of welding defect recognition is essentially incomplete. This characteristic determines that the recognition results do not reflect the actual situation. It also has a further influence on the classification of welding quality. This paper is concerned with the study of a rough set based method to reduce the influence and improve the classification accuracy. At first, a rough ...

A new spectroscopic parameter is used in this paper for on-line arc-welding quality monitoring. Plasma spectroscopy applied to welding diagnostics has typically relied on the estimation of the plasma electronic temperature, as there is a known correlation between this parameter and the quality of the seams. However, the practical use of this parameter gives rise to some uncertainties that could...

The applying of new technologies is connected with considerable outlays to receive the optimal welding regimes, metallographic research of welding seams, joint quality control and other facilities, which can be considerable lowered, using modelling of the welding processes. We propose to use new approach for modelling – analogue modelling, which is based on process investigation, using logical ...

It is considered to be available in reducing the weight of automobiles that the aluminum alloy is applied to manufacture them. The spot welding of aluminum alloys is difficult because of high welding current and small electrical resistance. It is necessary to clarify the relation between the nugget formation and the welding conditions. In this study, the relation between the spot welding condit...