Abstract. In recent years a wide range of 3D multi sensor systems for various applications has been proposed. Each them its own benefits and limitations. This paper proposes modified unicycle with 2D laser profiler attached to the wheel axle, thus creating radial scanning pattern. novel low-cost device combines advantages wheeled equipment those wearable or hand-held devices. After presenting h...

The relationship between the wear of three composite resins and the hardness of the abrasive was studied by a two-body abrasion test. The wear rates of the composites increased linearly with abrasive hardness from 530 to 2080 KHN. Measurement of the slope of the wear rate versus abrasive hardness over this range provided a sensitive method for ranking the composites.

Objective: The aim of the study was to make an inventory of current literature on the bond strength between zirconia and veneering porcelain after surface treatment of zirconia by grinding with diamond bur and/or with airborne-particle abrasion. Material and methods: The literature search for the present review was made following recommended guidelines using acknowledged methodology on how to d...

Two previous clinical studies evaluated the effect of end-rounded versus tapered bristles of soft manual brushes on the removal of plaque and gingival abrasion. However, the combined effect of an abrasive dentifrice on these outcomes has yet to be understood. The purpose of the present study was to compare the incidence of gingival abrasion and the degree of plaque removal obtained after the us...

PURPOSE This study evaluated the effect of air abrasion and polishing regimens on the flexural strength of yttrium stabilized polycrystalline tetragonal zirconia (Y-TZP). METHODS From Y-TZP blocks (InCeram 2000 YZ Cubes; Vita Zahnfabrik, Bad Säckingen, Germany) 120 bars (25 mm × 4 mm × 1.2 mm) were obtained according to ISO 6872:2008 and randomly divided into 4 groups: Group C: (control) with...

Cadmium has been identified as a threat to worker health and the environment. A test program was conducted to evaluate the performance of environmentally acceptable substitutes for cadmium plating. Fifteen test coatings were exposed to natural marine, industrial, and rural atmospheres for 12 -months. Additional laboratory tests were conducted to determine coating abrasion resistance, adhesion, ...

[Abstract] An automated E/H steering controller is essential for autonomous off-road equipment. This paper presents a methodology for designing the E/H steering controller through a combination of testing and simulation. The steering kinematic model provides the steering linkage gain between the hydraulic actuator and the front wheel. The model makes it possible to close the steering control lo...

The onset of the daily wheel running bout precedes dark onset by several hours in the early runner genetic variant of mice. Here, we test the hypothesis that timed daily administration of a melatonin agonist, ramelteon, or a benzodiazepine, triazolam, normalizes the timing of daily wheel-running rhythms in early runner mice. The daily profiles of wheel-running activity of early runner mice were...

Melanocytic nevus is common pigmented skin tumor, but it has rare occurrence near the external auditory canal. A skin graft is required if a wide surgical excision is performed for the nevi occurring near the external auditory canal. A CO2 laser was considered to be a good alternative for the removal of melanocytic nevus in this area. We herein report a case of compound nevus occurring near the...

Tire forces are at the heart of the dynamic qualities of vehicles. With the advent of electric vehicles the precise and accurate control of the traction and braking forces at the individual wheel becomes a possibility and a reality outside test labs and virtual proving grounds. Benefits of individual wheel torque control, or torque-vectoring, in terms of vehicle dynamics behavior have been well...