To research the relationship of micro-structures and antibacterial properties of the titanium-doped ZnO powders and probe their antibacterial mechanism, titanium-doped ZnO powders with different shapes and sizes were prepared from different zinc salts by alcohothermal method. The ZnO powders were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), u...

Porous NiTi was produced by sintering pre-alloyed NiTi powders (with small Ni addition to form Ni-rich composition) with NaCl powders which are removed to create 40-60 vol.% macropores which are open to the surface, blocky in shape, and 100-400 lm in size. The microporosity present between the NiTi powders is infiltrated by an in situ created NiTi-Nb eutectic liquid which, after solidification,...

Soy sauce powders were made by spray drying liquid soy sauce using maltodextrin as the drying aid. Maltodextrins of DE 5, DE 10 and DE 15 with concentrations of 20% and 40% (w/v) were incorporated into the soy sauce, respectively, as a carrier. The moisture adsorption isotherms of the powders with and without maltodextrins were studied. Tg of the powders were determined using a differential sca...

The blue-emitting phosphor cerium activated yttrium silicate, (Y1 mCem)2SiO5, was prepared via a novel synthesis technique called combustion synthesis. Combustion synthesis involves a highly exothermic redox reaction between metal nitrates and an organic fuel to produce a solid powder. The combustion synthesis parameter, the fuel-to-oxidizer ratio, has a direct effect on the physical properties...

We have studied the photoluminescence of nanocrystalline silicon microparticle powders fabricated by fragmentation of PSi membranes. Several porosities were studied. Some powders have been subjected to further chemical etching in HF in order to reduce the size of the silicon skeleton and reach quantum sizes. High-pressure water vapor annealing was then used to enhance both the luminescence effi...

A low-pressure plasma surface treatment of polymeric powders was carried out in a circulating fluidized bed (CFB) reactor (10 mm-I.D. × 800 mm-high) with CF4 glow discharge. The effects of solid circulation rate, treatment time and radio frequency (rf) power of plasma on fluorination of high-density polyethylene (HDPE) powders have been determined. X-ray photoelectron spectroscopy (XPS) and the...

a total of 68385 live pin-worm eggs from adhesive scotch tape were exposed to different detergent powders in under to compare method of detergent washing clothes with the boiling method for the control of family enterobiasis. results show that: a) 80.4-100 percent of eggs are destroyed after hatching within 6-8 hours of exposure to 0.25 gr% detergent at 10-250c. exposure for less than 6 hours h...

The effects of excipient crystallinity and water content on the physical stability of salmon calcitonin (sCT) in a spray-dried powder for inhalation have been investigated. sCT was dissolved in water with and without mannitol and then spray dried using a Büchi 190 spray dryer. The spray dried powders were stored for 5 days at 0, 29, 51, 58, 69, and 84% relative humidity at ambient temperature. ...

Nanoporous structures were fabricated from Fe76Si₉B10P₅ amorphous alloy annealed at 773 K by dealloying in 0.05 M H₂SO₄ solution, as a result of preferential dissolution of α-Fe grains in form of the micro-coupling cells between α-Fe and cathodic residual phases. Nanoporous Fe-Si-B-P powders exhibit much better degradation performance to methyl orange and direct blue azo dyes compared with gas-...

The paper presents preparation of YAG precursor powders mixture with ability for the reaction sintering at lower temperature. The powder mixture was mechanochemically processed and characterized for the specific surface area and crystallinity (XRD). Sintering experiments were performed on the batched powders, mechanochemically processed powders and as-synthesised YAG powders. XRD measurements a...