Temperature-dependent local structure and lattice dynamics of yttria (Y2O3) were studied by X-ray absorption spectroscopy. Novel method, which combines the reverse Monte Carlo and evolutionary algorithm techniques, was applied for the analysis of extended X-ray absorption fine structure at the Y K-edge. This approach allowed us to reconstruct 3D atomic structure models of crystalline and nanocr...

The synthesis of AlN and TiB2 by spark plasma sintering (SPS) and the effect of Nb2O5, Y2O3 and ZrO2 additions on the mechanical properties and densification of the produced composites is reported and discussed. After the SPS process, dense AlN and TiB2 composites with Nb2O5, Y2O3 and ZrO2 were successfully prepared. X-ray diffraction analysis showed that in the AlN composites, the addition of ...

In the present study, hydroxyapatite used as a matrix material was derived from the femur bones of Meleagris gallapova (MGHA) and then reinforced by yttriyum oxide (Y2O3, 5 and 10 wt%) and then pelleted samples at 350 MPa were sintered between 900 and 1300 °C. Finally, the effect of Y2O3 reinforcement on the microstructural and mechanical properties of MGHA was investigated. Scanning electron m...

Terbium doped Y2O3 planar waveguides were fabricated by sol–gel process and dip-coating using yttrium acetate as precursor. Two different doping modes were compared, i.e. introduction in the sol of dispersed Tb3+ions from dissolved Tb(NO3)3, or of nanoparticles of Tb2O3 or [Y2O3:50% Tb] from an alcoholic suspension. The chemical and nanostructural properties were analyzed by infrared spectrosco...

Monocrystalline cubic and/or monoclinic Y2O3:Eu nanoparticles (10-50 nm) were synthesized continuously without post-processing by single-step flame spray pyrolysis (FSP). These particles were characterized by Xray diffraction (XRD), nitrogen adsorption (BET) and transmission electron microscopy (TEM). Photoluminescence (PL) emission was measured as well as the time-resolved PL-intensity decay. ...

We demonstrate a very simple and reliable method of manufacturing clean, single-crystalline Y2O3 films on Nb(110) substrates in situ. The method exploits the oxygen bulk contamination of Nb as a source of clean oxygen. For substrate temperatures above 800 K oxygen segregation to the Nb surface is so efficient, that yttrium becomes oxidized during deposition without any background oxygen pressur...

X-ray absorption near-edge structure (XANES) depends on stereochemical features of coordination polyhedra around probe atoms. K-edge XANES of Y and Zr segregated in alumina grain boundaries has been obtained and analyzed using metallic Y and Zr, Y2O3, YAG, and monoclinic ZrO2 as standards. Grain-boundary-segregated Y and Zr show a positive chemical shift, and the magnitude of the shift, as comp...

The amount of oxygen storage and release from catalysts on a millisecond scale (MS-OSC) is believed to play an essential role in automotive three-way catalysts. We have developed a new method to evaluate the MS-OSC based on the rapid detection of reaction products on catalyst surfaces immediately after CO and O2 injections using pulsed valves by time-of-flight mass spectrometry. CO and O2 were ...

The implementation of the Chemical Solution Deposition (CSD) methodology with the Drop on Demand (DoD) inkjet printing (IJP) technology has been successfully employed to develop a Solution Deposition Planarization (SDP) method. We have used nanocrystalline yttrium oxide (Y2O3) to decrease the roughness of technical metallic substrates by filling the surface imperfections and thus avoiding costl...

BACKGROUND The increased use of engineered nanoparticles (NPs) has caused new concerns about the potential exposure to biological systems and the potential risk that these materials may pose on human health. Here, we examined the effects of exposure to different concentrations (0-50 μg/mL) and incubation times (10 hours, 24 hours, or 48 hours) of yttrium oxide (Y2O3) NPs on human embryonic kidn...