in order to study the sensitivity of vegetative growth to water deficit stress of a late-maturing peach (prunus persica l. cv. elberta) under orchard conditions, an experiment was conducted as randomized complete-block design with three treatments and four repetitions in shahdiran commercial orchard in mashhad during 2011. three irrigation treatments including 360 (low stress), 180 (moderate st...

mechanisms of tolerance to water deficiency stress for introducing sunflower hybrid was investigated by a two-factor experiment as a split plot design based on rcbd was at the research station in alborz province, hashtgerd region, iran in 2013. irrigation rates (irrigation after 50, 100 and 150 mm cumulative evaporation from class a evaporation pan) were considered in the main plots and sunflow...

OBJECTIVES The objectives of this in vitro study were (1) to assess the bond strength of the universal cement RelyX Unicem to dentin and to compare it with three conventional resin cements, (2) to test the influence of aging on their bonding capacity and (3) to test the influence of the operator on bonding quality by performing the same test in two different centers. METHODS 160 third molars,...

This study was conducted to evaluate the response of Iranian promisinglate blooming almond genotypes to deficit-irrigation stress on GN15 rootstock. One-year old plants subjectedto three deficit-irrigation, including moderate and severe stress (soil water potential, Ψsoil = -0.8 and -1.6 MPa, respectively) and a control treatment (Ψsoil= -0.33 MPa), were applied for six weeks to five grafting c...

Measurements of thermal conductivity and thermal diffusivity have been made on two samples of Climax Stock quartz monzonite at pressures between 3 and 50 MPa and temperatures between 300 and 523 K. Following those measurements, the apparatus was calibrated with respect to the thermal conductivity measurement using a reference standard of fused silica. Corrected thermal conductivity of the rock ...

Ultrasonic energy was applied to assist the wood vacuum drying process. At a drying temperature of 60°C, the absolute pressure was either 0.05 MPa or 0.08 MPa; the ultrasonic power and frequency were 100 W and 28 kHz, respectively. The results showed that the effective water diffusivity of the specimens dried by the ultrasonic assisted vacuum drying at 0.05 MPa or 0.08 MPa were higher than that...

in this study the feasibility of using salep as a new film-forming material was studied. the mechanical properties, water vapor permeability and thickness of salep films incorporated with glycerol were determined. increasing the content of dry material of salep from 1% to 3%(w/v) increased values for tensile strength and elongation at break from 16.16% and 18.85 mpa to 70.15% and 24.50 mpa resp...

The bonding strength between bone and alpha-2-cyanoacrylate polymers, with or without the addition of powdered hydroxyapatite, was determined. The tensile strength of a bone-cyanoacrylate bond was measured for each polymer: 4.31 +/- 0.88 MPa (methyl-), 5.74 +/- 0.62 MPa (ethyl-), and 8.33 +/- 0.41 MPa (isobutyl-). The tensile strength of the isobutyl-2-cyanoacrylate bond increased to 12.03 +/- ...

Six months-old seminal plants of 36 cacao genotypes grown under greenhouse conditions were subjected to two soil water regimes (control and drought) to assess, the effects of water deficit on growth, chemical composition and oxidative stress. In the control, soil moisture was maintained near field capacity with leaf water potentials (ΨWL) ranging from -0.1 to -0.5 MPa. In the drought treatment,...