Copper trimesate (Cu-BTC) MOF has been pointed out as a promising adsorbent for separating carbon dioxide from methane. However, MOF’s need to be shaped prior to their use in packed bed adsorbers in order to reduce pressure drop; on the other hand, the production of mechanically resistant shaped bodies reduces their adsorption performance. In this work, Cu-BTC tablets provided by BASF are evalu...

the aim of this study is to investigate the nitrate adsorption on granular ferric hydroxide (gfh). the effect of factors such as initial concentration of nitrate, ph, contact time, and adsorbent mass were determined. the study was done in laboratory–scale in which synthetic nitrate solutions in a batch reactor were placed in contact with the adsorbent to model adsorption kinetics. it was found ...

in this research, adsorption of dibenzothiophene (dbt) as a model of sulfur containing material has been studied by pb exchanged y-zeolite under different experimental conditions. the adsorption was kinetically fast and high adsorption capacity was obtained. the equilibrium adsorption data were analyzed using langmuir and freunlich isotherm models. the corresponding parameters and correlation c...

ch4, c2h6 and c2h4 are the most important outlet gaseous of oxidative couple methane (ocm) reaction and this process is a new technology for conversion of natural gas to ethane and ethylene products. in this study, adsorption of ocm outlet hydrocarbons over 10x zeolite has been examined at equilibrium conditions. temperature and pressure are the most effective operational parameters in the batc...

A zirconium sulfate-surfactant micelle mesostructure (ZS) was synthesized to investigate its capacity for phosphate removal from water. Its phosphate adsorption kinetics, the effect of pH and interfering anions, adsorption isotherm, desorption capacity, and reusability were investigated. The adsorption isotherms could be described by the Langmuir model. The ZS was an effective adsorbent for pho...

the adsorption of lead (11) and copper (11) in a fixed bed column using activated carbonprepared from nipa palm nut was investigated. thomas model and yoon and nelson kinetic models were used to analyze the column performance. the rate constant for thomas model increased with increase in flow rate and initial ion concentration but remained constant at varying bed height. adsorption capacity for...

The adsorption-desorption phenomena of surfactants were studied by measuring differential capacity-potential curves in a static solution and differential capacity-time curves in a flowing solution. The surfactants investigated were Aerosol OT, cetylpyridinium chloride, Hyamin 1622, tetrabutylammonium bromide, Triton X-100 and trioctylphosphineoxide. The differential capacity-potential and diffe...

An adsorbent Modified Biochar (MB) made from sewage sludge was characterized with FT-IR spectra and SEM image. The effects of contact time, solution temperature, pH and initial concentration on the adsorption performance Pb(II) onto MB was investigated in a batch adsorption experiment. Results showed that MB had great adsorption capacity, due to the existence of hydroxyl, carboxyl, ether, alcoh...

Monte Carlo simulations were employed to gain insight on HCN adsorption mechanism on LTA zeolites with different alkali metal cations, Li, Na, and K. Adsorption isotherms were calculated at four different temperatures at and above the normal boiling point of HCN. Results show that adsorption capacity depends on the type of the extraframework cation and Li-LTA showed the highest HCN adsorption c...

the used activated carbon was derived from pine-cone and was used for the removal of acid black 1(ab1) and acid blue 113(ab113) dyes. a batch sorption study was carried out in order to obtain optimum isotherm model. the study showed the best fit of the adsorption isotherm data was obtained using the langmuir model for both dyes. the monolayer maximum saturation capacities of ab1 and ab113 dyes ...