The laser-induced damage of mixtures of Sc2O3, HfO2, Al2O3 with SiO2 has been characterized in the infrared for both nanosecond and subpicosecond pulses. Laser-induced damage thresholds (LIDTs) are reported and discussed versus band gap for different compositions. The distributions versus fluence of nanosecond damage precursor densities are extracted fitting damage probability curves. Two model...

A concept is presented, which helps to rationalize the success of the industrially applied preparation route for Cu/ZnO/(Al2O3) catalysts. Many studies can be found in the open literature, which describe the critical dependency of the final catalyst’s properties on precursor chemistry. In line with previous reports, this concept identifies zincian malachite as the relevant precursor phase and i...

The radiation hardness and thermal stability of the electrical characteristics of atomic layer deposited Al2O3 layers to be used as passivation films for silicon radiation detectors with slim edges are investigated. To directly measure the interface charge and to evaluate its change with the ionizing dose, metal-oxide-silicon (MOS) capacitors implementing differently processed Al2O3 layers were...

A novel method to form ultrathin, uniform Al2O3 layers on graphene using reversible hydrogen plasma functionalization followed by atomic layer deposition (ALD) is presented. ALD on pristine graphene is known to be a challenge due to the absence of dangling bonds, leading to nonuniform film coverage. We show that hydrogen plasma functionalization of graphene leads to uniform ALD of closed Al2O3 ...

Performance of Ni/Al2O3 catalysts (10 wt.% Ni) in steam reforming of n-butane was investigated in terms of n-butane conversion, selectivity to hydrogen and hydrogen yield. The process was carried out in a fixed-bed tubular reactor at 650 °C and atmospheric pressure. The volumetric flow rates of n-butane and steam were 0.1 mL/min and 0.6 mL/min, respectively. The catalysts were prepared by preci...

NiSi nanocrystals of high density and good uniformity were synthesized by vapor–solid–solid growth in a gas source molecular beam epitaxy system using Si2H6 as Si precursor and Ni as catalyst. A metal– oxide–semiconductor memory device with NiSi nanocrystal–Al2O3/SiO2 double-barrier structure was fabricated. Large memory window and excellent retention at both room temperature and high temperatu...

Alumina-reinforced carbon nanofiber nanocomposites were prepared using different routes; powders mixture, colloidal route and sol-gel process followed by spark plasma sintering (SPS). CNFs/xAl2O3 (x=10-50 vol.%) were prepared through nanopowders mixing in a high-energy attrition milling. The main limitations in the preparation of this kind of nanocomposites are related to the difficulty in obta...

Polyaminoboranes [N(R)H-BH2]n (1: R = H, 2: R = Me) were pyrolyzed on a range of substrates: silicon, metal foils (stainless steel, nickel, and rhodium), and sapphire wafers, as well as on Al2O3 and AlN powders. The pyrolysis of 2 on a Si-wafer resulted in porous nanostructures containing hexagonal-boron nitride (h-BN). In the case of 1 or H3N·BH3 as precursor, using rhodium foil as substrate a...