The purpose of this study was to evaluate the effects of functional monomers contained in the primers, as well as alumina particle abrasion on bonding between stainless steel and acrylic resin. SUS XM27 steel was primed with one of the following materials; Alloy Primer, Estenia Opaque Primer, M. L. Primer, and Super-Bond Liquid. Steel disks were either ground flat or alumina-blasted, primed wit...

This study aimed to evaluate the effect of adhesive systems based on a thiouracil monomer on bonding to silver-palladium-copper-gold (Ag-Pd-Cu-Au) alloy (Castwell M.C.12). Disk specimens were cast from the alloy and then air-abraded with alumina. The disks were bonded using six bonding systems selected from four primers and three luting materials. Shear bond strengths were determined both befor...

Background: The purpose of this study was to compare and evaluate the effects of metal primer on the shear bond strength of denture base resin to base metal alloy after electrolytic and laser etching. Materials and Methods: A total of 48 cobalt‐chromium (Co‐Cr) alloy specimens were fabricated. The specimens were divided into 6 groups of 8 specimens each. Group I: Sandblasting (control group). G...

The absence or poor chemical bonding of acrylic resin to Cobalt-Chromium metal frameworks, often introduces microleakage and bond failure at the interface. The aim of this study was to compare the shear bond strength of sandblasted cast and ingot cobaltchromium alloy to heat-cured and self-cured acrylic resins primed with four different metal primers. Fifty Co-Cr Ingot and fifty cast specimens ...

The purpose of the present study was to evaluate the effects of four experimental primers on bond strength between a self-curing luting agent and silver-palladium-geld alloy. The experimental primers were in mixed solutions of a thiouracil primer (Metaltite) and a phosphate primer (Eprieord, PM, PE, or PP), which were designated as Meta]tite/Eprieord, Metaltite/PM, Metaltite/PE, and MetaltitelP...

BACKGROUND For success of any indirect metal restoration, a strong bond between cement and the intaglio surface of metal is imperative. The aim of this study is to evaluate and compare the effect of different surface treatment on the tensile and shear bond strength of different cements with nickel-chromium alloy. MATERIAL AND METHODS 120 premolars were sectioned horizontally parallel to the o...

The aim of this study was to develop an effective primer to improve the adhesive property between all kinds of dental metal alloy and resin cement. To this end, we synthesized N,N'-dimethacryloylcystine (NDMCC) which had both disulfide functional group (to improve adhesion between precious metal alloy and resin) and carboxyl group (to improve adhesion between non-precious metal alloy and resin)...

objectives: this study aimed to compare the shear bond strength (sbs) of composite to stainless steel crowns (ssc) using two mechanical surface treatments (msts) and two bonding systems. materials and methods: eighty-four sscs were divided into six groups of 14; group1: no mst+scotchbond universal adhesive (n+u), group 2: surface roughening by a diamond bur+scotchbond universal adhesive (r+u), ...

The aim of this study was to investigate the adhesive property of palladium-silver alloy (Pd-Ag) and the simulated clinical performance of Pd-Ag porcelain-fused-to-metal (PFM), resin-bonded, fixed partial dentures (RBFPDs). A total of 40 Pd-Ag discs (diameter=5 mm) were prepared and divided into the following four groups (n=10): a) No sandblasting, used as a control; and b, 50 µm; c, 110 µm; an...