We have successfully produced bimetallic PtNi alloy nanoparticles on poly (diallyldimethylammonium chloride) (PDDA)-modified graphene nanosheets (PtNi/PDDA-G) by the “one-pot” hydrothermal method. The size of PtNi alloy nanoparticles is approximately 2–5 nm. The PDDA-modified graphene nanosheets (PDDA-G) provides an anchored site for metal precursors; hence, the PtNi nanoparticles could be easi...

The influence of gas nitriding surface treatment on the superelastic Ti-23Nb-0.7Ta-2Zr-0.5N alloy was evaluated. A thorough characterization of bare and nitrided Ti-based alloy and pure Ti was performed in terms of surface film composition and morphology, electrochemical behaviour, and short term osteoblast response. XPS analysis showed that the nitriding treatment strongly influenced the compo...

Hydroxyapatite (HA) coatings are applied widely to enhance the level of osteointegration onto orthopedic implants. Atmospheric plasma spray (APS) is typically used for the deposition of these coatings; however, HA crystalline changes regularly occur during this high-thermal process. This article reports on the evaluation of a novel low-temperature (<47°C) HA deposition technique, called CoBlast...

We demonstrated a substrate-moving vapor-liquid-solid (VLS) route for growing composition gradient ZnCdSSe alloy nanowires. Relying on temperature-selected composition deposition along their lengths, single tricolor ZnCdSSe alloy nanowires with engineerable band gap covering the entire visible range were obtained. The photometric property of these tricolor nanowires, which was determined by blu...

In this study, we report an effective approach, pre-solid solution (SS) treatment, to reduce the in-vitro bio-degradation rate of the hydrothermal-synthesizing coated Mg-2Zn-Mn-Ca-Ce alloy in Hanks' solution. Pre-SS treatment alters the microstructure of alloys, which benefits the corrosion resistances of the substrate itself and the formed coating as well. The micro-galvanic corrosion between ...

Using scanning and transmission electron microscopy, the analysis of structure, phase elemental composition contact zone system coating (high-entropy FeCrCoNiMn alloy)-substrate (5083 alloy) after electron-beam processing was performed. The formation a multiphase, multielement submicro- nanocrystalline structure has been established. high-speed cellular crystallization in layers adjacent to sub...

The finite element procedure with the unified disturbed state modeling concept presented in Part I, Basaran et al. (1998), is verified here with respect to laboratory test results for Pb40/Sn60 eutectic solder alloy. This solder alloy is a commonly used interconnection material for surface mount technology packages. It is demonstrated that the proposed procedure provides highly satisfactory cor...

For the first time, this research reports the formation of nanoporous layers of metals on the surface of metal substrates by Raney method and their conversion to corresponding porous perovskite layers. The noble metals doped perovskites are used as catalytic converter for reducing automotive pollutants. The use of perovskite as a substrate for the noble metals can reduce the need for such metal...

Liquid-phase electronic circuits are patterned on an elastomer substrate with a microcontact printer. The printer head dips into a pool of a liquid-phase gallium-indium alloy, e.g., eutectic gallium-indium (EGaIn) or gallium-indium-tin (Galinstan), and deposits a single drop on a silicone elastomer substrate. After patterned deposition, the liquid-phase circuit is sealed with an additional laye...

The joining of lead-free Sn-3.0Ag-0.5Cu (SAC305) solder alloy to metal substrate with the addition of a porous Cu interlayer was investigated. Two types of porous Cu interlayers, namely 15 ppi—pore per inch (P15) and 25 ppi (P25) were sandwiched in between SAC305/Cu substrate. The soldering process was carried out at soldering time of 60, 180, and 300 s at three temperature levels of 267, 287, ...