heavy metals, as gamma alumina nanoparticles pollutants, in water resources. Therefore, the purpose of this paper was to evaluate the removal of copper (II) ions from aqueous solutions using gamma alumina nanoparticles as a adsorbent. Batch adsorption studies carried out to study various parameters included contact time, initial concentration of copper (II) ions, pH, and gamma alumina nanoparti...

ru/al2o3 catalysts were prepared by conventional incipient wetness impregnation as well as colloid deposition of rucl3 precursor via in situ reduction with ethylene glycol (polyol) method on alumina support. the samples were characterized by tem, xrd and tpr techniques. the catalytic performance tests were carried out in a fixed-bed micro-reactor under different operating conditions. ethylene g...

an experimental and theoretical energy and exergy analysis was conducted for a cylindrical cavity receiver employed in a parabolic dish collector. based on simultaneous energy and exergy analysis, the receiver average wall temperature and overall heat transfer coefficient were determined. a simplified nusselt number for heat transfer fluid (htf) through the receiver as a function of reynolds an...

• Alumina and LTL zeolite nanoparticles suited the in situ embedment method. • The nanoparticle embedded membranes had higher hydrophilicity and

A controlled architecture of nanoelectrodes, of a similar size to small molecule-binding aptamers, is synthesized inside nanoporous alumina. Gold nanoparticles with a controlled size (about 2 nm) are electrogenerated in the alumina cavities, showing a fast electron transfer process toward ferrocyanide. These uncapped nanoparticles are easily modified with a thiol-containing aptamer for label-fr...

A highly active heterogeneous Fenton catalyst was fabricated by impregnating iron oxide nanoparticles in alumina coated mesoporous SBA-15 silica.

Copper oxide supported on γ-alumina nanoparticles were prepared and were well characterized. In this study catalytic activities of the supported copper oxide for oxidation of cyclohexene to 2-cyclohexene-1-ol, 2-cyclohexene-1-one and cyclohexene oxide with TBHP and H2O2 as the oxidant, in the liquid phase were considered. For the CuO/γalumina nanocomposites, acetonitrile as the solvent was empl...

The physicochemical properties of nanomaterials differ from those of the bulk material of the same composition. However, little is known about the underlying effects of these particles in carcinogenesis. The purpose of this study was to determine the mechanisms involved in the carcinogenic properties of nanoparticles using aluminum oxide (Al(2)O(3)/alumina) nanoparticles as the prototype. Well-...

The thermomechanial properties of polymeric nanocom‐ posites are related to the quality of the adhesion between matrix and nanoparticle. Since the adhesion is related to the nature of the materials and the surface available for chemical, electrostatic and mechanical interactions among these materials, weak bonding forces between alumina (inorganic) and polymer matrices (organic) were expected. ...

HAAlumina nanocomposite is biocompatible and has desirable mechanical and physical properties. Less cost, simple synthesis method, and fast production are the added advantages of this nanocomposite. Thus HA coatings on the surface of alumina substrates are used to combine excellent bioactivity of HA with superior mechanical properties of the alumina substrates. One of the elements associated wi...