This research paper compares the thermal conductivity and thermal expansion coefficients of glass fiber reinforced epoxy composite laminates (GFRP laminates) made using the Hand layup technique. The composite laminates were fabricated by filling with varying concentrations of fly ash, stone powder, aluminium oxide (Al2O3), magnesium hydroxide (Mg (OH)2), Silicon carbide particles(SiC) and hemat...

In this work, multi-walled carbon nanotube composites (MWCNCs) were produced by catalytic pyrolysis of post-consumer plastics with aluminium oxide-supported nickel, cobalt, and their bimetallic (Ni/?–Al2O3, Co/?–Al2O3, NiCo/?–Al2O3) oxide-based catalysts. The influence catalyst composition reaction temperature on the yield structure CNCs investigated. Different temperatures (800, 900, 950, 1000...

Physical vapour deposition combined with atomic layer was exploited to design a model system of UFG aluminium narrow grain size and shape distribution, including two types interfaces (Al-Al & Al-Al2O3), Al-Al boundary orientations exclusively parallel the loading axis. This enabled isolated study strengthening mechanisms that ultrathin oxide layers would provide in metal multilayer structure. T...

PURPOSE Although several surface treatments have been recently investigated both under in vitro and in vivo conditions, controversy still exists regarding the selection of the most appropriate zirconia surface pre-treatment. The purpose of this study was to evaluate the effect of alumina (Al) and aluminium nitride (AlN) coating on the shear bond strength of adhesive resin cement to zirconia cor...

The study investigates the effect of aluminium oxide nanoparticles as an additive to Madhuca Indica (mahua) methyl ester blends on performance, emission analysis of a single-cylinder direct injection diesel engine operated at a constant speed at different operating conditions. The test fuels are indicated as B10A0.2, B10A0.4, B20A0.2, B20A0.4 and diesel respectively. The results indica...

Nano-sized γ-Al2O3 was synthesized successfully by a simple method using Al2(SO4)3·18H2O as aluminium source and in the presence of polyethylene glycol (PEG 2000). FTIR spectroscopy, X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to characterize the structure and morphology of synthesized powder. The results showed that PEG playe...

Neodymium aluminate coatings have been prepared in-situ by the laser zone melting (LZM) method, using a CO2 SLAB-type laser emitting at 10.6 µm. Polycrystalline Al2O3 commercial plates have been used as substrates, and coatings were prepared from the corresponding mixtures of powdered neodymium and aluminium oxides as starting materials. Microstructure, studied by SEM and phase composition, stu...

Upon the isothermal oxidation of an ODS FeAl Grade 3 intermetallic alloy, a structured oxide scale is developed between 800 and 950o C. TEM studies have revealed a three-layered structure with a top nanoequiaxed alumina, a central alumina and a bottom Fe-Al spinel. At these temperatures, aluminium outward diffusion does not seem to be suppressed neither by the spinel sub-layer nor by the yttria...