in this study, a new method for joining aluminum tubes in subsurface structures using steel converting and aluminum welding are presented and reviewed. but near the weld area is under high thermal cycle and will cause residual stresses in heat affected zone. therefore for assessment of proposed connection from the perspective of residual stress by using the finite element method welding of tube...

Reduction in size and weight of micro-electronic devices becomes limited by the availability of suitable power sources. This paper presents micro-fabrication routes of an aluminum anode/oxygenated alkaline electrolyte/platinum cathode micro cell as a first step towards the development of highly efficient thin form factor aluminum anode cells. On-demand microfluidic addition of electrolyte can o...

This study investigated the effects of four operational and environmental variables on the removal of trace metal contaminants from drinking water by electrocoagulation (EC). Removal efficiencies for five metals (arsenic, cadmium, chromium, lead and nickel) were compared under varying combinations of electrode material, post-treatment, water composition and pH. Iron electrodes out-performed alu...

Lithium-ion batteries show poor performance for high power applications involving ultrafast charging/discharging rates. Here we report a functionally strain-graded carbon-aluminum-silicon anode architecture that overcomes this drawback. It consists of an array of nanostructures each comprising an amorphous carbon nanorod with an intermediate layer of aluminum that is finally capped by a silicon...

Current rectification effect in an asymmetric molecule HCOO-C6H4-(CH2)n sandwiched between two aluminum electrodes has been studied using an ab initio nonequilibrium Green's function method. The conductance of the system decreases exponentially with the increasing number n of CH2. The phenomenon of current rectification is observed such that a very small current appears at negative bias and a s...

We present first-principles calculations based on density functional theory for the conductance of monatomic Al wires between Al(111) electrodes. In contrast to the even-odd oscillations observed in other metallic wires, the conductance of the Al wires is found to oscillate with a period of four atoms as the length of the wire is varied. Although local charge neutrality can account for the obse...

We introduce a new device architecture for the independent mechanical and electrostatic tuning of nanoscale charge transport. In contrast to previous gated mechanical break junctions with suspended source-drain electrodes, the devices presented here prevent an electromechanical tuning of the electrode gap by the gate. This significant improvement originates from a direct deposition of the sourc...

Resistive-switching devices based on Metal–Insulator–Metal (MIM) structures have shown promising memory performance characteristics while enabling higher density of integration. Usually, these MIM devices are fabricated using different processing conditions including high temperature thermal treatments that could lead to undesirable chemical reactions in the insulator material and at its interf...

A nanostructure composed of Anodic Aluminum Oxide (AAO) was obtained on an electrode of a quartz crystal microbalance (QCM) chip by anodizing Al thin film in an oxalic acid solution. The effective surface area was expanded by these nanostructures. Several morphologies were observed under various anodic conditions by using scanning electron microscopy (SEM). We demonstrated that a QCM chip with ...

The paper deals with an assessment of the influence of finite conductivity to the current induced along the horizontal grounding electrode. Analysis is performed in frequency and time domain, respectively. Current distribution along the grounding electrode buried in a lossy half-space is determined via analytical solution of the corresponding Pocklington equation in the frequency domain. The co...