Three-dimensional finite element models are developed to investigate the effects of both tensile load and uniform temperature load on the stresses in hybrid joints. During the solution of the problem, finite element method (FEM) is preferred, as this method is very suitable for solving many engineering problems. An aluminum sheet is bonded a composite sheet. Hybrid joints are designed from both...

A phenomenological theory is presented for describing the anisotropic plastic flow of orthotropic polycrystalline aluminum sheet metals under plane stress. The theory uses a stress exponent, a rate-dependent effective flow strength function, and five anisotropic material functions to specify a flowpotential, an associated flow rule of plastic strain rates, a flow rule of plastic spin, and an ev...

Rapid inspection of aircraft structures for flaws is of vital importance to the commercial and defense aircraft industry. In particular, inspecting thin aluminum structures for flaws is the focus of a large scale R&D effort in the nondestructive evaluation (NDE) community. Traditional eddy current methods used today are effective, but require long inspection times. New electromagnetic technique...

This study presents experimental and theoretical results of winter dew harvest in México City in terms of condensation rate. A simplified theoretical model based on a steady-state energy balance on a radiator-condenser was fitted, as a function of the ambient temperature, the relative humidity and the wind velocity. A glass sheet and aluminum sheet white-painted were used as samples over the ou...

more recently, titanium and aluminum alloys are gaining more interests to be implemented in hydro-forming applications. it is necessary to predict forming limits for these sheet alloys. forming limits play an important role in metal forming processes. forming limit diagrams, present the limit strains for various linear strain paths. in other hand, forming limit curve (flc), illustrates localize...

Cellulosic paper is thermolabile and its strength properties tend to decrease under high temperature conditions. In this work, the effects of aluminum trihydrate filler on the tensile and burst strength of paper prepared from bleached wood pulps were investigated. The use of aluminum trihydrate maintained the tensile and burst strength of paper sheet dried at 200 °C for 4 hours. Thermogravimetr...

Surface composite layers were successfully fabricated on an A 1050-H24 aluminum plate by dispersed iron (Fe) and magnetite (Fe₃O₄) particles through friction stir processing (FSP). Fe and Fe₃O₄ powders were packed into a groove of 3 mm in width and 1.5 mm in depth, cut on the aluminum plate, and covered with an aluminum sheet that was 2-mm thick. A friction stir processing (FSP) tool of square ...

The impulsive riveting method is described as the punching and joining of sheet metal carried out using the impulsive energy of a weight accelerated by an air compressor. Parts are held together between the rivet and rivet-holder. A hole is made in the sheets by the high speed collision of rivet and a weight (approximately 100 m/s or more). Another method, punch riveting, joins the sheets by pr...

Single point incremental sheet metal forming is a sheet metal forming process that forms products without the complex dies and tools with low cost. In this study, the incremental sheet metal forming process has been experimentally investigated on the explosively-welded Al/Cu bimetal sheets. Also, the effects of process parameters, such as arrangement of layer`s bimetal, tool diameter and tool p...