Two kinds of austenite grow from d-ferrite during the cooling of the duplex stainless steel weld deposits studied here, Widmanstätten plates and allotriomorphs which precipitate at d–d grain boundaries. It is found using microtexture measurements that the preferred crystallographic orientation of the Widmanstätten austenite can be estimated using established theory if it is assumed that there i...

Nano/submicron austenitic stainless steels have attracted increasing attention over the past few years due to fine structural control for tailoring engineering properties. At the nano/submicron grain scales, grain boundary strengthening can be significant, while ductility remains attractive. To achieve a nano/ submicron grain size, metastable austenitic stainless steels are heavily cold-worked,...

Besides permitting an accurate determination of the ferromagnetic-to-paramagnetic phase transition temperature and the characteristic temperatures for the beginning and end of the growth of martensite (austenite) phase at the expense of austenite (martensite) phase while cooling (heating), the results of an extensive ac susceptibility, sound velocity and internal friction investigation of the t...

The tempering of two–phase mixtures of bainitic ferrite and carbon–enriched retained austenite has been investigated in an effort to separate the reactions that occur at elevated temperatures from any transformation during cooling to ambient conditions. It is demonstrated using synchrotron X–radiation measurements, that the residue of austenite left at the tempering temperature partly decompose...

A bainitic microstructure with fine ferrite plates (20 to 40 nm) in a matrix of high-carbon retained austenite, obtained by isothermal transformation at 200°C, was characterized with an energy-compensated optical position-sensitive three-dimensional atom probe. The average carbon concentration in the austenite was found to be 8.0±1.6 at.% and in the bainitic ferrite 1.1±0.7 at.%. The latter con...

Many aspects of the crystallographic texture which develops when austenite transforms into martensite or bainite are well established because the process by which the parent lattice is transformed into that of the product is mathematically defined. This is not the case when the ferrite forms by a reconstructive mechanism. The allotriomorphic ferrite nucleates heterogeneously at austenite grain ...

We have performed in situ synchrotron X-ray diffraction experiments to assess the influence of aluminium and phosphorus on the austenite stability in low-alloyed transformation-induced plasticity steels during the high-temperature bainitic holding and the subsequent martensitic transformation during cooling to temperatures between room temperature and 100 K. Although the addition of aluminium i...

This article presents a study of fatigue-crack propagation behavior in Nitinol, a 50Ni-50Ti (at. pct) superelastic/shape-memory alloy, with particular emphasis on the effect of the stress-induced martensitic transformation on crack-growth resistance. Specifically, fatigue-crack growth was characterized in stable austenite (at 120 8C), superelastic austenite (at 37 8C), and martensite (at 265 8C...

In-situ time-resolved X-ray diffraction technique with synchrotron radiation was used to track austenite decomposition in steels. Measurements from a Fe-C-Si-Mn steel indicate two lattice parameters in the austenite, possibly due to the development of carbon-rich and carbon-poor austenite prior to transformation. The lattice parameter became uniform with the progress of transformation and the f...

A generalized phase transformation kinetics model is used to understand the martensite to austenite transformation in a cold-rolled and annealed metastable AISI 301LN ultrafine-grained austenitic stainless steel. The model shows that the presence of interstitial nitrogen and heavy cold-rolling is important to promote fast transformation kinetics, through rapid nitrogen-diffusion and austenite n...