In order to establish titanium welding technology TIG arc weldability and MIG arc weldability were surveyed. For TIG arc weldability influence of arc length and thickness to proper region of welding condition became obvious. For MIG arc weldability a new method to defend wandering phenomenon was developed.

It is important to adjust the welding gun's inclination during automatic curved-joint tracking of arc welding. In this paper, a novel method is proposed to detect the deviation and inclination of the welding gun based on the arc currents acquired by a high-speed rotational arc sensor. It uses a least-squares method to fit the arc currents to a plane in three dimensions. The deviation and inclin...

In industries and research organizations most widely used welding methods are shield metal arc welding (SMAW), gas metal arc welding (GMAW), gas tungsten arc welding (GTAW) and submerged arc welding (SAW). The SAW process is often preferred because it offers high production rate, high melting efficiency, ease of automation and low operator skill requirement. This review will be very helpful for...

The use of time-frequency entropy to quantitatively assess the stability of submerged arc welding process considering the distribution features of arc energy is reported in this paper. Time-frequency entropy is employed to calculate and analyze the stationary current signals, non-stationary current and voltage signals in the submerged arc welding process. It is obtained that time-frequency entr...

It is well khown that welding arcs emit intense ultraviolet radiation and those who conduct welding operations or work nearby are exposed to the radiation and often suffer injuries. It is desirable to evaluate the ultraviolet radiation from the viewpoint of industrial health. But, there have been few quantitative studies of this radiation. We determined the ultraviolet effective irradiance, bas...

HUNDREDS OF THOUSANDS of people work in welding, cutting and brazing. It is estimated that welders compose 1 to 2% of the U.S. working population, including a significant segment of the aging workforce. According to OSHA’s Christine Petitti, the most commonly used welding processes are: 1) Flux-cored arc welding (FCAW). This process uses an arc between a continuous filler metal electrode and th...

Overlay welding of nickel alloys for corrosive and sour service is commercially accomplished with most welding processes ranging from shielded metal arc (stick) to laser. The valve industry has generally standardized on hot wire gas tungsten arc (GTA-HW), pulsed gas metal arc (GMA-P) and submerged arc (SAW) welding. This document will focus on these three but a little history will help explain ...

Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...

The use of time-frequency entropy to quantitatively assess the stability of alternating current square wave submerged arc welding process considering the distribution features of arc energy is reported in this paper. Time-frequency entropy is employed to calculate and analyze the current signals under different duty cycle, frequency and welding speed in the submerged arc welding process. It is ...

Most previous welding simulations are based on a flat weld pool surface and become unmeaningful when the surface deformation is significant. In recent years, some researchers have developed numerical models capable of simulating free surface motion in welding processes, but they focus on the discussions of physical equations, boundary conditions, and solutions, rather than the numerical algorit...