Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...

Asphalt is a visco-elastic material having properties of elastic solid at low temperature and viscous liquid at high temperature. Properties of asphalt binder depend upon temperature, rate of loading and aging conditions. Although asphalt binder is only 4-5 % of asphalt concrete mix by weight but it plays a vital role in defining the pavement performance. That is, pavement response is heavily d...

The dynamic or complex modulus test is considered to be a mechanistically based laboratory test to reliably characterize the strength and load-resistance of Hot-Mix Asphalt (HMA) mixes used in the construction of roads. The most common observation is that the data collected from these tests are often noisy and somewhat non-sinusoidal. This hampers accurate analysis of the data to obtain enginee...

The conventional French fatigue test has yielded significantly different results for two asphalt materials with the same grade of pure asphalt. A research program was begun to study the influence of the asphalt nature on the fatigue behavior of asphalt materials. The program included full-scale experimentation on the circular test track of the Laboratoire Central des Ponts et Chaussees, laborat...

γ-(2,3-Epoxypropoxy)propyltrimethoxy silane surface modified layered double hydroxides (KH560-LDHs) were prepared and used to improve the ultraviolet ageing resistance of asphalt. The results of X-ray photoelectron spectrometry (XPS) indicated that KH560 has been successfully grafted onto the surface of LDHs. The agglomeration of LDHs particles notably reduced after KH560 surface modification a...

Asphalt pavement recycling has grown dramatically over the last few years as the preferred way to rehabilitate existing asphalt pavements. Rehabilitation of existing asphalt pavements has employed different techniques; one of them, cold in-place recycling with foamed asphalt (CIR-foam), has been effectively applied in Iowa. However, Iowa’s current cold in-place recycling (CIR) practice utilizes...

resilient modulus of pavement materials is a key property required for the pavement thickness design. this paper describes the results of an experimental study on the effects of temperature and loading frequency on the resilient modulus of a sbs polymer modified asphalt concrete under dry and saturated conditions. dynamic creep tests were conducted on dry and saturated specimens of the mixture ...

The objective of this study is to review existing literature in the area of nano-modification of asphalt and proceed to apply nano-materials to asphalt to improve the performance. This study integrates literature review, preparation, and characterization of nano-modified asphalt materials. In the experimental testing montmorillonite, nanoclay at 2% and 4% by weight of asphalt was blended in asp...

In this paper, the possibility of improving the global response of asphalt materials for pavement applications through the use of hydrated lime and Electric Arc-Furnace Steel Slag (EAFSS) was investigated. For this purpose, a set of asphalt mortars was prepared by mixing two different asphalt binders with fine granite aggregate together with hydrated lime or EAFSS at three different percentages...