In this paper, the pulsatile flow of blood through an inclined catheterized stenosed artery is analyzed. Perturbation method is used to solve the implicit system of partial differential equations with suitable boundary conditions. Various analytical expressions axial velocity, flow rate, wall shear stress and effective viscosity have been derived with the help of MATLAB for understanding the fl...

The aim of the present study is deriving an analytical solution to incompressible thermal flow in a micro-Couette geometry in the presence of a pressure gradient using Burnett equations with first- and second-order slip boundary conditions. The lower plate of the micro-Couette structure is stationary, whereas the upper plate moves at a constant velocity. Non-dimensional axial velocity and tempe...

In this work, variation of parameter method is applied to study two-dimensional flow of nanofluid in a porous channel through slowly deforming walls with suction or injection. The results of the developed approximate analytical solution using the variation of parameter method is verified with the results of numerical solution using fourth-order Runge-Kutta method coupled with shooing techniques...

In this paper, exact solution for two-plane transverse vibration analysis of axial-loaded multi-step Timoshenko rotor carrying concentrated masses is presented. Each attached element is considered to have both translational and rotational inertia. Forward and backward frequencies and corresponding modes are obtained using transfer matrix method (TMM). The effect of the angular velocity of spin,...

The interpenetration and interaction of supersonic, magnetized tungsten plasma flows has been directly observed via spatially and temporally resolved measurements of the Thomson scattering ion feature. A novel scattering geometry allows independent measurements of the axial and radial velocity components of the ions. The plasma flows are produced via the pulsed power driven ablation of fine tun...

in order to simulate the rotating disk contactor all hydrodynamic parameters, dispersed phase hold-up, characteristic velocity, mean drop size, drop size distribution, axial mixing and mass transfer have been taken into account. mechanisms of mass transfer (stagnant, circulating, oscillating drops) were used in this study. column height found from effect of mean drop size and drop size distribu...

following recent works of several authors like huilgol, bhattacharya etd. and javadpour et al., this paper is to contribute further to the literature of axial flow in a rotational coaxial rheometer. we consider axial flow of herschel bulkley mode1 between two concentric cylinders with the inner one rotating, while the outer cylinder is held stationary. an attempt has been made to direct the ana...

in the computational fluid dynamics (cfd) modeling of gas-solids two phase flow, the effect of boundary conditions play an important role in predicting the hydrodynamic characteristics of fluidized beds. in this work, the hydrodynamics of conical fluidized bed containing dried tio2 nano-agglomerates were studied both experimentally and computationally. the pressure drop was obtained by pressure...

High temperature Fischer-Tropsch synthesis process use fixed fluidized bed as a reactor. In order to understand the flow behavior in the fluidized bed better, the research of how the radial velocity affects the entire flow field is necessary. Laser Doppler Velocimetry (LDV) was used to study the radial velocity distribution along the diameter direction of the cross-section of the particle in a ...

Effect of time dependent normal transpiration on the problem of unsteady viscous flow and heat transfer in the vicinity of an axisymmetric stagnation point of an infinite circular cylinder moving simultaneously with time-depended angular and axial velocities and with time-dependent wall temperature or wall heat flux are investigated. The impinging free stream is steady with a strain rate . A re...