Results of analytical modeling and computer simulation of wave-induced structural loadings on ships i!lwaves is presented! with consideration ~f bow flare slamming, bottom impact slamming, and springing. Consideration is given only to the case of head seas, and the outputs are obtained in the form of time histories due to the nature of the nonllnearities and the nonstationary propert~es associa...

Simple, accurate buckling interaction formulae are presented for long orthotropic plates with either simply supported or clamped longitudinal edges and under combined loading that are suitable for design studies. The loads include 1) combined uniaxial compression (or tension) and shear, 2) combined pure inplane bending and 3) shear and combined uniaxial compression (or tension) and pure inplane...

The interaction between Euler buckling and Brazier instability in an orthotropic cylindrical tube was investigated. A simple closed-form interaction curve was obtained by using the principle of minimum potential energy including the 3D extended Brazier’s 2D type cross-section ovalization and the potential energy of axial compression. The interaction curve consists of an Euler buckling load and ...

STUDY DESIGN A comparison of cervical facet capsule strain fields in cadaveric motion segments exposed to whiplash-like loads and failure loads. OBJECTIVES To compare the maximum principal strain in the facet capsular ligament under combined shear, bending, and compressive loads with those required to injure the ligament. SUMMARY OF BACKGROUND DATA The cervical facet capsular ligament is th...

Femoral fractures are among the most common major injuries that an orthopedic surgeon will be required to treat. During fracture treatment of femur bone the biomaterials are used for fracture healing. Evaluation of femur fractures using clinical data is confounded by multiple patient and fracture specific factors making it difficult to draw meaningful conclusions, despite the inclusion of large...

Bending manipulation and direct force measurements of ultrathin boron nitride nanotubes (BNNTs) were performed inside a transmission electron microscope. Our results demonstrate an obvious transition in mechanics of BNNTs when the external diameters of nanotubes are in the range of 10 nm or less. During in situ transmission electron microscopy bending tests, characteristic "hollow" ripple-like ...

This study compared the biomechanical performance of 4.5-mm limited-contact dynamic compression plates and 3.5-mm locking compression plates for the fixation of unstable humeral shaft fractures. Composite humeri were divided into two groups: 3.5mm LC and 4.5-mm LCDC plates. Osteotomy gaps of 5-mm, simulating diaphyseal comminution, were created. Stiffness tests were performed in anterior-poster...

In North America, most rail corridors are constructed using ballasted track. Monitoring the ballast support condition and improving upon current sub-structure/ballast maintenance strategies will ensure safe railroad operations. However, it is inherently difficult to evaluate the pressure distribution at the sleeperballast interface. Researchers at University of Illinois at Urbana-Champaign (UIU...