Accurate modeling of masonry has been a major concern of the researchers in the past decades. Besides reinforced and unreinforced masonry structures, masonry can be found in frame structures as infill panels which are used as partitions and/or external walls. These elements role as a part of structure and introduce a large degree of nonlinearity into the system. In this study, a micro-modeling ...

Masonry structures are complex systems that require detailed knowledge and information regarding their response under seismic excitations. Appropriate modelling of a masonry structure is a prerequisite for a reliable earthquake-resistant design and/or assessment. However, modelling a real structure with a robust quantitative (mathematical) representation is a very difficult, complex and computa...

Infilled frame structures are commonly used in buildings. Masonry infilled RC frames are the most common type of structures used for multi-storeyed constructions in the developing countries, even in those which are located in seismically active regions also. Masonry infill walls are mainly used to increase initial stiffness and strength of reinforced concrete (RC) frame buildings. In the presen...

Seismic assessment of masonry structures is plagued by both inherent randomness and model uncertainty. The former is referred to as aleatory uncertainty, the latter as epistemic uncertainty because it depends on the knowledge level. Pioneering studies on reinforced concrete buildings have revealed a significant influence of modeling parameters on seismic vulnerability. However, confidence in me...

Masonry has low cohesive strength and is susceptible to the brittle failure, when subjected to induced tensile stresses. It fails due to lateral tensile stresses even when masonry prisms are tested in uni-axial static compression and the stress-strain curve remains almost linear up to failure. Although masonry normally resists compressive forces, under lateral in-plane cyclic loads some parts o...

Masonry structures are complex systems that require a thorough and detailed knowledge and information regarding their behaviour under seismic excitations. Appropriate modelling of a masonry structure is a prerequisite for a reliable earthquake resistant design or assessment. However, modelling a real structure to a robust quantitative (mathematical) representation is a very difficult, complex a...

An earthquake of magnitude 6.4 occurred in Yangbi County, Yunnan Province on 21 May 2021, with a focal depth 8 km, and strong ground motion vertical components was monitored by station (53YBX). A total 14,122 houses were damaged the earthquake, 232 them collapsed. Vertical motions have been gained more attention for its effect structure’s seismic response epicenter or near-fault regions at pres...

Two modeling techniques for practical nonlinear static analysis are implemented to support the development and usage of a new Limit Design method for special reinforced masonry shear walls. The new seismic design alternative is under consideration for future versions of the building code requirements for masonry structures in the U.S. The proposed simplified models were applied to a planar one-...

Masonry infill walls are often used as non-structural elements. According to the past structural failure, ignorance of interaction between infill walls and enclosed frame may lead to the different seismic response for non-ductile building frames. The main contribution of this paper is to analytically investigate the behavior of reinforced concrete with masonry infill panels as participating str...

Strengthening of un-reinforced masonry (URM) structures to improve its seismic performance is not only well recognized among the research community but also getting attention of practicing engineers around the globe. The estimation of lateral capacity and performance of masonry becomes complex because of heterogeneous nature of its constituent materials and other associated problems. Heterogene...