The rapid heating of carbon-fiber-reinforced polymer matrix composites leads to complex thermophysical interactions which not only are dependent on the thermal properties of the constituents and microstructure but are also dependent on the thermal transport between the fiber and resin interfaces. Using atomistic molecular dynamics simulations, the thermal conductance across the interface betwee...

In the current study the effect of nanoclay content and carbon fiber orientation on the buckling properties of epoxy/nanoclay/ carbon fiber orientation is investigated. Buckling samples were prepared with 1, 3 and 5 wt% of nanoclay and 0, 30 and 45 degrees of fiber orientations based on VARTM technique. The results obtained from the buckling tests showed that adding 1wt% of nanoclay into the pu...

Here we report the first example of a class of additively manufactured carbon fiber reinforced composite (AMCFRC) materials which have been achieved through the use of a latent thermal cured aromatic thermoset resin system, through an adaptation of direct ink writing (DIW) 3D-printing technology. We have developed a means of printing high performance thermoset carbon fiber composites, which all...

Fiber reinforcement is an important method to enhance the performance of concrete. In this study, the compressive test and impact test were conducted, and then the hybrid effect between steel fiber (SF) and carbon fiber (CF) was evaluated by employing the hybrid effect index. Compressive toughness and impact toughness of steel fiber reinforced concrete (SFRC), carbon fiber reinforced concrete (...

Ozone treatment of isotropic-pitch-based carbon fiber was found to increase the surface oxygen concentration and change surface oxygen from C–O to CNO, thereby causing the contact angle between fiber and water to be decreased to zero. Thus, the bond strength between fiber and cement paste was increased and the tensile strength, modulus and ductility of carbon fiber reinforced cement paste were ...

To produce high quality and low cost carbon fiber-based composites, the optimization of the production process of carbon fiber and its properties is one of the main keys. The stabilization process is the most important step in carbon fiber production that consumes a large amount of energy and its optimization can reduce the cost to a large extent. In this study, two intelligent optimization tec...

The compressive response of polymer matrix fiber reinforced unidirectional composites (PMC’s) is investigated via a combination of experiment and analysis. The study accounts for the nonlinear constitutive response of the polymer matrix material and examines the effect of fiber geometric imperfections, fiber mechanical properties and fiber volume fraction on the measured compressive strength an...

Maximum 200 words) The main goals of this research program at UTSI were: 1) to produce low cost carbon fibers and 2) to develop specific carbonbased material technologies to meet current and future high performance fiber-reinforced composite needs of FTA and other organizations. UTSI has been carrying out the relevant research programs since it received the carbon fiber spinning technologies an...

From application perspectives in adsorption, activated carbon fiber (ACF) is by far one of the most important carbon nanoporous materials to be considered. It has great advantages over other commercial porous storage materials. Activated carbon fiber (ACF) is a promising microporous material with a fiber shape and well-defined porous structure. In general, production of ACF can be commercially ...

Carbon fibers have multiple potential advantages in developing high-strength biomaterials with a density close to bone for better stress transfer and electrical properties that enhance tissue formation. As a breakthrough example in biomaterials, a 1.5 mm diameter bisphenol-epoxy/carbon-fiber-reinforced composite rod was compared for two weeks in a rat tibia model with a similar 1.5 mm diameter ...