An oil and gas well cementing in Gachsaran formation, where sustained annular pressure has been reported in many wells, presents a big challenge in Maroon field. The main challenges are preventing gas migration and achieving zonal isolation using a competent cement sealant system which is able to withstand downhole stresses and high temperatures during production cycles. Unlike conventional cem...

This paper describes an experimental investigation into the pore structure of cement mortar using mercury porosimeter. Ordinary Portland cement, manufactured sand, and natural sand were used. The porosity of the manufactured sand mortar is higher than that of natural sand at the same mix proportion; on the contrary, the probable pore size and threshold radius of manufactured sand mortar are fin...

In this paper, we describe the monitoring of Portand cement paste, with a 0.50 water cement ratio (w/c), during early age period, recurring to optical and electrical techniques. The optical monitoring of the cement paste was realized with FBG temperature sensors, and the temperature variations during the early age period were characterized. The RF values of the cement paste and therefore predic...

The effect of cement dust on the growth parameters of brinjal (Solanum melongena) was studied. The cement dust (2 g/plant) exhibited both inhibitory and promotory effects on different growth parameters of the S. melongena. The decrease in the number of leaves (37.19 and 62.28%), leaf area (57.93 and 57.26%), root length (48.21 and 56.75%), shoot length (27.27 and 38.98%), plant circumference (3...

This study presents the result of using melting to recover both industrial sludge slag (the main constituent of which is calcium fluoride) and water works sludge slag as fine aggregate in cement. The main characteristics of both slag and cement mortars were measured to evaluate the feasibility of using slag as aggregate. In this study, the slag replacement ratios were 0, 10, 20, 30, 40, and 50%...

Exposure conditions significantly affect the resistance of cement to sulfate attack. This article investigates the effect of sulfate on electrical conductivity of ordinary Portland cement (OPC). Cement paste specimens were prepared according to water/cement (W/C) ratio equal 0.25 either free of sodium sulfate or its addition with concentrations of 5000ppm, 10000ppm and 15000ppm by weight. This ...

7 We propose a new method to estimate the initial cement content, water content and free water/cement ratio (w/c) 8 of hardened cement-based materials made with Portland cements that have unknown mixture proportions and 9 degree of hydration. This method first quantifies the composition of the hardened cement paste, i.e. the 10 volumetric fractions of capillary pores, hydration products and unr...

Experiments have been carried out to study the influence of moisture condition, including moisture content and its distribution, on the chloride diffusion in partially saturated ordinary Portland cement mortar. The mortar samples with water-to-cement (w/c) ratios of 0.4, 0.5 and 0.6, cured for one year, were preconditioned to uniform water saturations ranging from 18% to 100%. The interior rela...

Air pollution has assumed a mammoth proportion in recent times because of causation of health hazards and loss of economic productivity of crop plants. The present study was carried out to assess the impact of cement klin dust pollution on some selected legume crops viz. Arachis hypogaea, Vigna mungo, V. radiate, Dolichos lablab and Cajanus cajan which are grown around the cement industry. Effe...

Deep infection following total knee arthroplasty is a catastrophic complication. Recently, antibiotic-loaded bone cement has been applied to prevent deep infection after total joint arthroplasty. However, there is still controversy about the prophylactic effect of antibiotic-loaded bone cement after primary total knee arthroplasty. This study reviewed 2293 patients who underwent primary total k...