Different amounts of nanoclay were incorporated into the acrylic resin matrix at 0, 1, 3, and 5 wt.% loadings. The coatings were applied on low carbon steel plates. Optical microscopy, sedimentation test, transmission electron microscopy, and X-ray diffraction were employed to investigate the dispersion of nanoclay in matrix. The corrosion resistance of coatings was evaluated by electrochemical...

in order to comparision of the micromorphic properties of saline-sodic and nonsaline-nonsodic soils in the west of urmia lake, four soil profiles (2profile in saline-sodic soils and 2profiles in nonsaline-nonsodic soils) were investigated. these profiles were described and sampled using standard methods. soil samples were used for physico chemical analysis and undisturbed and oriented samples w...

Most of the pitched roofs of existing buildings in Europe are covered by non-white roofing products, e.g., clay tiles. Typical, cost effective, cool roof solutions are not applicable to these buildings due to important constraints deriving from: (i) the owners of homes with roofs visible from the ground level; (ii) the regulation about the preservation of the historic architecture and the minim...

Microfibrous palygorskite and tubular halloysite clay mineral combined with nanocrystalline TiO2 are incorporating in the preparation of nanocomposite films on glass substrates via sol-gel route at 450C. The synthesis is employing nonionic surfactant molecule as pore directing agent along with acetic acid-based sol-gel route without addition of water molecules. Drying and thermal treatment of c...

Surface charge of mixtures of lepidocrocite and i\lite determined by adsorption of potentia l-determining and electrolyte ions is studied as a functi on of pH and NaCI concentration. Deviations between results oblained by both methods were a fu nction of the ill ile content of the mixtures, and can be mainly attributed lO coatings of hydroxyalum inium compl exes on the constant charge surfaces ...

Application of a delaminated kaolin clay base coat onto linerboard provides a barrier coating for a subsequently applied polymer top coat with potential advantages of increased paper stiffness, improved water resistance at reduced polymer overcoat. Motivated by coating material cost reduction, feasibility of the technique is demonstrated by applying a delaminated clay coating online followed by...

activity of biohybrid coatings of atrazine-degrading bacteria Pseudomonas sp. ADP" (2014). The atrazine-degrading bacterial strain Pseudomonas sp. ADP was immobilized by the sol–gel process within thin silica layers coated onto water-retaining carrier materials (expanded clay pellets and scoria). The performance of the obtained biohybrid material has been investigated concerning long-term activ...

Virus inactivation and virus adsorption, resulting from interactions with minerals, constitute important aspects of an aquifers disinfection capacity. Investigations using a 20 cm column filled with medium-grained natural sands demonstrated that the sands can attenuate up to 62% of a pulse of viruses injected. Experiments using repeatedly washed sands had significantly lower attenuation capacit...

Transport and retention of colloid tracers were evaluated in standard petrographic thin sections, prepared from saprolite (Cr horizons) formed from fractured sedimentary rocks, using epi-fluorescence microscopy. Thin sections prepared from dismantled hydrogeological columns revealed four domains of macropores with apparent apertures ranging from 1 to 500 Am. Colloid retention occurred within bo...

Montmorillonite (MMT) clay mineral is widely used as filler for several organic coatings. Its activity is increased by exfoliation via chemical modification to produce nanomaterials. In the present work, the modification of MMT to form nanogel composites is proposed to increase the dispersion of MMT into epoxy matrices used to fill cracks and holes produced by the curing exotherms of epoxy resi...