The purpose of the present study was to evaluate how ultraviolet light <UV) irradiation using an ordinary UV sterilizer would affect the bonding of experimental composite resins to an autopolymerizing acrylic resin. To this end, three composite resins and one unfi11ed resin-of which the compositions were similar to commercial composite resin artifieial teeth were prepared as repair composites. ...

The effect of prepolymerized particle fillers on fracture toughness of four commercial composite resins was studied. The ground surface morphology was examined with a field emission scanning electron microscope. Fracture toughness was determined by using single edge notched specimens. Acoustic Emission (AE), which is the elastic wave due to the release of energy from the localized sources of ma...

Phenolic resins, phenol-formaldehyde polymers previously thought to be nonbiodegradable, are produced at an annual rate of 2.2 million metric tons in the United States for many industrial and commercial applications. Three independent lines of evidence established their biodegradability with the white-rot fungus Phanerochaete chrysosporium. Chromatic transformation of growth medium (yellow to p...

The purpose of the present study was to evaluate how ultraviolet light (UV) irradiation using an ordinary UV sterilizer would affect the bonding of experimental composite resins to an autopolymerizing acrylic resin. To this end, three composite resins and one unfilled resin--of which the compositions were similar to commercial composite resin artificial teeth--were prepared as repair composites...

Ion exchange resins have been used to help formulate pharmaceuticals since the late 1950's. During that time they have proved to be safe and effective excipients and are now used in many commercial formulations throughout the world. In this article we will look at some of the common problems faced by formulators and how using ion exchange resins may be able to solve them. Ion exchange resins ar...

To characterize a set of synthetic resins, a methodology by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) has been developed. The studied reference materials were commercial versions of a wide range of synthetic resins. For each polymer, the pyrolytic and chromatographic conditions were optimized to adequately resolve the fragment mixture in a short time. The proposed analytical met...

One method of reducing styrene emissions from vinyl ester (VE) and unsaturated polyester resins (UPE) is to replace some or all of the styrene with fatty acid-based monomers. Methacrylated fatty acid (MFA) monomers are ideal candidates because they are inexpensive, have low volatilities, and free-radically polymerize with vinyl ester. The viscosity of VE resins using these fatty acid monomers r...

This experimental study investigates the bioactive potential of filaments produced via hot melt extrusion (HME) and intended for fused deposition modeling (FDM) 3D printing purposes. The oleo-gum-resins from benzoin, myrrha, and olibanum in pure state and also charged with 10% of metal oxide nanoparticles, TiO2, P25, Cu2O, and MoO3, were characterized by ultraviolet-visible (UV-Vis) and Fourier...

Urea formaldehyde resins were formulated with vatiables of three reaction pHs (1.0, 4.8, and 8.0 5.0) and three catalysts (sodium hydroxide, sodium hydroxide/ammonium mix, and triethanolamine) . The resins were prepared by placing all formaldehyde and water in reaction kettle and pH was adjusted with sulfnric acid and sodium hydroxide, respectively. Urea was added in 1.5 equal parts at 1 minute...

Agricultural by-products are generally poor adsorbents of anions in solution. Therefore, modification of the by-product could enhance its anion exchange capabilities. The objective of this study was to increase the anion exchange properties of the agricultural by-product, soybean hulls, by chemical modification. Soybean hulls were quaternized with the quaternizing agent, N-(3-chloro-2hydroxypro...