This paper provides a review of the state of the art on the study of the fatigue behaviour of mechanical components coated with thin hard corrosion-resistant coatings such as the physically or chemically vapour deposited ones. Some references address the experimental characterization of the fatigue resistance of coated steel and light alloys. Some coatings have been observed to prove effective ...

Hardened nickel coating is widely used in many industrial applications and manufacturing processes because of its benefits in improving the corrosion fatigue life. It is clear that increasing the coating thickness provides good protection against corrosion. However, it reduces the fatigue life. Thus, applying a thin layer of coated nickel might give an acceptable corrosion protection with minim...

More than 10 years ago, the three major causes of failures in the Israel Air Force were: maintenance (-16% of failures), manufacturing (~14%), and design (-12%). While fatigue (~34%) and overload (~23%) were the two major failure mechanisms, more than 10% of failures were related to corrosion mechanisms. These include stress corrosion cracking, corrosion fatigue, localized corrosion, hot corros...

This paper presents a fatigue assessment model that was developed for corroded reinforced concrete (RC) beams strengthened using prestressed carbon fiber-reinforced polymer (CFRP) sheets. The proposed model considers the fatigue properties of the constituent materials as well as the section equilibrium. The model provides a rational approach that can be used to explicitly assess the failure mod...

The corrosion fatigue crack growth characteristics of small (>35pm) surface and corner cracks in aluminum alloy 7075 is established. The early stage of crack growth is studied by performing in situ long focal length microscope (500X) crack length measurements in laboratory air and 1% NaCl environments. To quantify the “small crack effect” in the corrosive environment, the corrosion fatigue crac...

Original scientific paper The paper deals with the effect of roughness, residual stresses and pitting corrosion on different shot peened (SP) ENAW 7075 aluminium alloy in different states. Suitable residual stress profile increases the applicability and life cycle of mechanical parts, treated by shot peening. Pitting corrosion has a major influence on aging of structural elements made of high s...

The development and current state-of-the-art in fracture mechanics in relation to studies of environment-enhanced fatigue-crack growth (corrosion fatigue) and fatigue-crack growth per se are reviewed. Patterns of response of materials to different loading and environmental conditions are considered in terms of the probable mechanisms for environmental embrittlement. The usefulness of the fractu...

Modularity in total hip arthroplasty provides multiple benefits to the surgeon in restoring the appropriate alignment and position to a previously damaged hip joint. The vast majority of modern implants incorporate modularity into their design with some implants having multiple modular interfaces. There is the potential for failure at modular junctions because of fretting and crevice corrosion ...