This paper reports a new approach to the fabrication of 3D structured diaphragms using integrated surface and deep reactive ion etching (DRIE) bulk silicon micromachining on a silicon-on-insulator (SOI) wafer. The fabrication process has been applied to a 1 mm × 2 mm × 1.2 μm diaphragm designed for a biomimetic directional microphone. The membrane has two 200 μm × 380 μm × 20 μm silicon proof m...

In this study the effects of corrugated absorber plate and using aerosol-carbon black nanofluid on heat transfer and turbulent flow in solar collectors with double application and air heating collectors, were numerically investigated. The two-dimensional continuity, momentum and energy equation were solved by finite volume and SIMPLE algorithm. In the present investigation all the simulations w...

The influence of recycling on double-pass solar air collectors with welding of the V-corrugated absorber has been studied experimentally and theoretically. Welding the V-corrugated absorber and the recycle-effect concept to the solar air collector was proposed to strengthen the convective heat-transfer coefficient due to turbulence promotion. Both the recycle effect and the V-corrugated absorbe...

This paper extends the theory of the diffraction of sound on 1D corrugated surfaces to 2D corrugated surfaces. Such surfaces, that are egg crate shaped, diffract incoming sound into all polar directions, which is fundamentally different from 1D corrugated surfaces. A theoretical justification is given for extending the classical grating equation to the case of incident inhomogeneous waves, for ...

An axially corrugated horn antenna with an elliptically shaped taper is proposed for satellite communication applications. This structure is a good candidate for the feed of reflectors and also for improving the electrical properties of reflector antennas. A tapering method is used to justify the horizontal location of the corrugation profile which improves the electrical performance of the pre...

abstract: the new neonatal ventilation methods have been developed along with utilization of new technological tools.this device is synchronized with the patient’s respiratory efforts. the ideal synchronized breath needs to be synchronous with initiation, size, and termination of the breath without delay in detecting of initial resiratory effort by device .the synchrony of respiration contribut...

In this paper, using theory of sheets, the deflection of suspended diaphragm has been obtained under uniform and circular loading. This type of diaphragm, unlike other diaphragms, has a central support which is recommended to be used in MEMS applications. The relationship between diaphragm deflection and static analysis of this diaphragm enjoys a great significance in investigating and understa...

The paper focuses on optimization of lightweight sandwich panels with prismatic cores subject to bending loads in the two principal in-plane directions. Comparisons are made with optimal designs of panels with corrugated cores: a limiting case. When optimized for loading transverse to the prism axis, prismatic panels outperform those with corrugated cores, especially at lower loads. In contrast...

In this work, an analytical study on the bending stiffnesses of corrugated board has been performed. Formulations to calculate the bending stiffnesses D11, D22, D12, and D66 of the equivalent plate representing the corrugated board have been established, and then compared to expressions suggested by other investigators. Several methods for modeling the shape of the corrugated orthotropic medium...