PROBLEM STATEMENT When designing and evaluating asphalt pavements, engineers must have an understanding of how the pavement materials will react to the stresses and strains of vehicle loads at varying temperatures. When a load is applied to asphalt concrete at a certain temperature, to what degree will the pavement "bounce back" to its original height? Pavement designers predict this spring-lik...

Recently developed Mechanistic-Empirical Pavement Design Guide (MEPDG) determines the probable total rutting by summing up the deformations of all layers of the trial pavement. If all distresses outcomes including rutting are within the specification the trial section is designed for construction. Therefore, vertical deformation (or strain) needs to be measured to validate the MEPDG for local c...

The use of recycled materials in pavement construction has seen, over the years, a significant increase closely associated with substantial economic and environmental benefits. During the past decades, many transportation agencies have evaluated the effect of adding Reclaimed Asphalt Pavement (RAP), and, more recently, Recycled Asphalt Shingles (RAS) on the performance of asphalt pavement, whil...

The concept of extracting heat energy from asphalt pavements has been investigated in this study. The scope of work consisted of finite element modeling and testing with small and large scale asphalt pavement samples. Water flowing through copper tubes inserted within asphalt pavements samples were used as heat exchangers in the experiments. The rise in temperature of water as a result of flow ...

The use of reclaimed asphalt pavement (RA) in new asphalt pavements can provide important economical savings, while reducing the negative environmental impact. The European research project PARAMIX aims to improve the techniques for hot mix recycling in plant and cold mix in situ recycling, so as to increase the amount of reclaimed asphalt and develop competitive road pavement rehabilitation te...

An immense problem affecting environmental pollution is the increase of waste tyre vehicles. In an attempt to decrease the magnitude of this issue, crumb rubber modifier (CRM) obtained from waste tyre rubber has gained interest in asphalt reinforcement. The use of crumb rubber in the reinforcement of asphalt is considered as a smart solution for sustainable development by reusing waste material...

This study integrates ground spectrometry, imaging spectrometry, and in-situ pavement condition surveys for asphalt road assessment. There is strong spectral evidence for asphalt aging and deterioration processes, hence field spectra showed that asphalt aging and deterioration produce measurable changes in spectra as these surfaces undergo a transition from hydrocarbon dominated new roads to mi...

Analyses of dynamic responses are significantly important for the design, maintenance and rehabilitation of asphalt pavement. In order to evaluate the dynamic responses of asphalt pavement under moving loads, a specific computational program, SAFEM, was developed based on a semi-analytical finite element method. This method is three-dimensional and only requires a two-dimensional FE discretizat...

Marshall Test design methods are used to design TLA modified asphalt mixture and base asphalt mixture respectively, and their pavement performance is tested. The results showed that there is a transforming coefficient of 1.15 between OAC of 40% TLA modified asphalt mixture and that of base asphalt mixture, and ultimate gradation of the TLA modified asphalt mixture is finer than previous gradati...

Each of pavements’ life cycle phases such as material extraction, transportation, construction, operation, rehabilitation, and end-of-life emits greenhouse gases. Such emissions can be influenced by climate change via changes in the rates of pavement deterioration and thus intensity and frequency of maintenance and rehabilitation. However, climate change has not been given full considerations i...