SHAHAB is a PC- based simulator developed by Olefin Research Group (ORG), with the simultaneous simulation of the reactor, the firebox, the convection section and the transfer line exchanger in steam Cracking units. The reaction mechanism of thermal cracking of hydrocarbons is generally accepted as free-radical chain reactions. Using a rigorous kinetic model, a complete reaction network for rep...

An experimental study of the influence of autogeneous healing on chloride ingress in cracked concrete is presented. In the study, two concrete mixtures (a Portland cement mix and a blast furnace slag mix), two healing regimes (submerged and fog room regime), two cracking ages (14 and 28 days), and multiple crack widths are used as parameters. An adapted Rapid Chloride Migration testing procedur...

Dalam pengoperasian furnace, uap yang dihasilkan furnace harus dijaga pada suhu 370-375oC dan tidak boleh melebihi 375oC untuk mencegah terjadinya cracking waste oil. Salah satu sistem kontrol dapat digunakan mengontrol adalah optimal dengan metode LQR (Linear Quadratic Regulator). Penerapan ini mampu mempercepat waktu keadaan mantap sistem. Performansi telah memenuhi syarat keoptimalan sebuah ...

The paper embodies the influence of thermal treatment on the morphology, composition and leaching behaviour of titania slag. When Ti-slag was subjected to heat treatment, it developed pores and oxidized at high temperature. This slag consists mainly of a M3O5 phase with an orthorhombic structure. The decrepitation was studied by oxidizing the titania slag sample produced in a pot/muffle furnace...

The effects of the bond coat species on the delamination or fracture behavior in thermal barrier coatings (TBCs) was investigated using the yclic thermal fatigue and thermal-shock tests. The interface microstructures of each TBC showed a good condition without cracking or delamination after flame thermal fatigue (FTF) for 1429 cycles. The TBC with the bond coat prepared by the air-plasma spray ...

Ñ Anticoking Coatings for High Temperature Petrochemical Reactors Ñ Coke deposition is a major problem for several refinery and petrochemical processes, among which steam cracking for ethylene production. Decreasing coking rates will reduce decoking frequency and will also decrease heat transfer degradation. For these processes, a means of reducing coking phenomena is the application of anticok...

Article history: Received: 14.10.2013. Received in revised form: 15.11.2013. Accepted: 09.12.2013. Fire-induced vibration of four panels A-D has been studied and also relevant furnace temperature, temperature gradient, deflections and cracking distributions introduced. Time-domain analysis indicating vibration intensity has important relationships with boundary constraints. According to vibrati...

Plastic cracking of concrete such as plastic settlement and plastic shrinkage cracking is directly related to the bleeding of concrete, which is a natural time-dependent process in a fresh concrete mix. A portion of the mixing water together with very fine materials finds its way to the surface of the concrete during this process. The rapid rate of initial bleeding slows down with the elapsed t...