The composition dependence of the emission intensities was investigated in Cu-Ni as well as Ni-Zn binary alloy samples when a low-pressure argon laser-induced plasma was employed as the excitation source. The calibration curve in the Cu-Ni alloy system gave a linear relationship, implying that the selective evaporation of Cu or Ni atoms was caused less in those alloys having several chemical co...

in this research a layer of ni-cu-p was deposited on 304 stainless steels by using gelatin and thiourea asadditives in a sulfate solution. in order to determine the properties of deposited layers, a microhardness testerwas used for microhardness measurement, x.r.d. for microstructural analysis, and a scanning electronmicroscope equipped with e.d.x. for determining morphology and analyzing the d...

during estuarine mixing of fresh water with saline water and due to the flocculation process, aportion of dissolved metals come into particulate phase, and the dissolved load decreases. this process plays an important role in self-purification of heavy metals in rivers. in this study, flocculation of cu, mn, ni, pb and zn during mixing of cheshme-kileh river water with caspian sea water has bee...

Scanning tunneling microscopy studies of Ni islands deposited on TiO2(1 1 0) show that the islands grow threedimensionally at room temperature with an average height of approximately 6.5 A and diameter of 30 A. The broadness of the island size distributions can be controlled by the diffusion (D) to deposition flux (F ) ratio, with the narrowest distribution corresponding to the smallest D=F rat...

The microstructure of sputter deposited Ti-rich Ni-Ti thin films doped with Cu in the range 020.4 at.% and annealed for 1 h at 500 and 600°C has been investigated and correlated with the mechanical properties of the films measured by depth-sensing nanoindentation. X-ray diffraction analysis showed the microstructural evolution of Ni-Ti thin films when doped with Cu and annealed at different tem...

This study addresses the feasibility of removing Cu and Ni from sludges of printed circuit board (PCB) plants by acidic extraction. Citric acid, acetic acid, hydrochloric acid, nitric acid, and sulfuric acid at various concentrations were experimentally examined to determine preferred conditions for removing Cu and Ni. Experimental results indicate that the removal ratios of Cu were 57% (citric...

concentrations of elements (as, co, cu, ni, mo, pb, v, cd, cr and zn) are studied in the surface sediments of bakhtegan lake, northwest of nyriz city, iran, to assess metal contamination. the average abundance order of trace elements content in bakhtegan lake sediments is cr>ni> v> zn> cu> co> as> pb> mo>cd. the comparison of trace elements concentration in bakhtegan lake sediments with toxicol...

A study was carried out to characterize Ni-Co-PVC and Ni-Cu-PVC composite materials prepared by mechanical alloying technique (MAT) using SEM, EDS and electrochemical test. Composite materials were prepared by mixing together 95% of metal powder (Ni+Co or Ni+Cu) with 5% PVC. PVC was used as a binder and tetrahydrofuran (THF) was used as a solvent in composite material preparation. Based on the ...

The aim of this research is to calculate the elastic constants and Bulk modulus of Cu-20 wt% Ni random Nanoalloy. The molecular dynamics simulation technique was used to calculate the mechanical properties in NPT ensemble. The interaction between atoms as well as cohesive energy in the Nanoalloy modeled systems was calculated by Morse et al. two body potential. Also the temperature of the syste...