The chemical spray pyrolysis method was used to deposit CuInS2 (CIS) thin films and Au nanoparticles (NPs) in two configurations: glass/Au-NP layer covered with CuInS2 film (Au-NP/CIS) and glass/CuInS2 films covered with Au-NP layer (CIS/Au-NP). According to X-ray diffraction (XRD), the spray of 2 mM HAuCl4 aqueous solution with a volume of 2.5 to 15 ml onto a glass substrate at 340°C results i...

Liquid crystal-nanoparticle composite systems have attracted particular attention for both academic interests and applications in inducing macroscopic alignment, altering electro-optic response of the liquid crystal hosts, generating ordered, tunable soft metamaterials. Herein, synthesis two shapes CuInS2 nanoparticles, tremelliform-like frame-like CuInS2, their utilization producing uniform ho...

cuins2 nanostructures were  synthesized  via  a  simple  surfactant-free solvothermal  route.  in  this  synthesis,  thiosemicarbazide  and thioglycolic acid were used as sulfur sources. the effects of different parameters such as type of precursor and time on the morphology and particle  size  of  the  samples  have  been  investigated.  the nanostructures  were  characterized  by  means  of  ...

ABSTRACT Herein, we describe the synthesis and characterization of a conjugated donor-acceptor copolymer consisting of a pyrrolopyridazinedione (PPD) acceptor unit, and a benzodithiophene (BDT) donor unit. The polymerization was done via a Stille cross-coupling polycondensation. The resulting PPD-BDT copolymer revealed an optical bandgap of 1.8 eV and good processability from chlorobenzene solu...

Two-dimensional (2D) nanostructures have generated significant interest in the scientific community as a result of their high surface area and remarkable optoelectronic properties. In this work, we present a simple colloidal synthesis for ultrathin nanosheets of both In2S3 and CuInS2. Contradictory phase designations exist for In2S3 at the nanoscale as a result of overlapping reflections from m...

CuInS2 quantum dots (QDs) were deposited onto TiO2 nanorod arrays for different cycles by using successive ionic layer adsorption and reaction (SILAR) method. The effect of SILAR cycles on the light absorption and photoelectrochemical properties of the sensitized photoelectrodes was studied. With optimization of CuInS2 SILAR cycles and introduction of In2S3 buffer layer, quantum dot-sensitized ...

An indigenously developed chemical spray pyrolysis system was used to deposit polycrystalline CuInS2 thin films. It was found that smaller spray rate results in films with better crystallinity and lower resistivity. Increase in surface roughness of the films was observed for higher spray rates. Variations in film stoichiometry with composition of spray solution were analyzed along with its opto...

Time-of-Flight TOF measurements have been performed on n-type TiO2 /p-type CuInS2 heterojunctions. The TiO2 film thickness has been varied between 200 and 400 nm, while the CuInS2 film thickness has been fixed at 500 nm. The TOF response can be accurately modeled, if the potential drop across the p-n heterojunction with a large density of interface states is properly accounted for. Also electro...

Since neurotransmitters significantly influence the brain activity, our understanding of the human brain will remain imperfect until all aspects relating to them become clear. One of the key challenges in neuroscience researches and therapies is elucidating the mechanisms by which the neurotransmitter release take place and is regulated in quantity and in time. Despite the enormous number of st...