The proximal femoral nail antirotation had been successful in treating unstable trochanteric fractures. Previous studies have shown technical problems such as unsatisfactory fracture reduction, poor insertion technique, and poor blade position leading to complications such as cutout. We present a case of proximal femoral nail antirotation cutout resulting from the blocking of the gliding mechan...

This paper investigates the buckling of finite isotropic rectangular plates with circular cutout under uniaxial and biaxial loading. The complex potential method is used to calculate the pre-buckling stress distribution around the cutout in the plate with finite dimensions. To satisfy the in-plane boundary conditions, the generalized complex-potential functions are introduced and a new method b...

The free vibration analysis of the functionally graded cylindrical shell panels  with and without cutout is carried out using the finite element method based on a higher-order shear deformation theory. A higher-order theory is used to properly account for transverse shear deformation. An eight noded degenerated isoparametric shell element with nine degrees of freedom at each node is considered....

This paper investigates the moments and stress resultants from infinite FG laminates with different polygonal cutouts subject to uniaxial tensile load. The analytical solution used for the calculation of stress resultants and moments is the basis of the complex-variable method and conformal mapping function. The impact of various factors, namely cutout orientation angle, cutout aspect ratio as ...

Identification of the last effective boll population allows informed decisions for termination of insecticide and application of harvest aids. However, the current COTMAN cutout reference (i.e., NAWF=5) indicates physiological cutout (Oosterhuis et al., 1999) may need to be changed for ultra-narrow-row (UNR) cotton. This study is part of a multi-state project the overall objective of which is t...

This work addresses a scheduling problem arising from an application in a real industrial context, namely task scheduling in the cutting department of a clothing industry. In general, clothes are produced by assembling fabric cutouts. In the cutting department, fabric rolls on a line with a constant speed, and is cut by automated machines arranged along the line. Machines are all identical. A f...

The lateral buildup ratio (LBR) used to estimate the depth dose distribution of electron beams for an irregular cutout field was obtained for a 4-MeV energy beam from a Varian 21 EX linear accelerator. The depth-dose curves for a group of circular cutout fields starting from a 2-cm diameter were measured. Electron diodes were used in a large water tank to measure the LBR values for 6, 9, 12, an...

In dusty plasma experiments, the confining potential of the GEC rf Reference Cell is commonly assumed to be parabolic. There are various ways to test this assumption, many of which interfere with the plasma. We use the noninvasive method of perturbing a single particle suspended in the plasma with laser pulses. In this experiment a cw laser (532nm, 0.01.05W) supplied the radiation pressure forc...