Laser cutting is widely used thermal energy based non-contact type, nonconvectional machining process. In the present research, the effect of laser machine processing parameters such as laser power, gas pressure, cutting speed and thickness effect on measured response such as surface roughness. The experiment was designed according to Taguchi L27 orthogonal array with three different level of e...

Surface roughness, an indicator of surface quality is one of the most specified customer requirements in a machining process. For efficient use of machine tools, optimum cutting parameters (speed, feed and depth of cut) are required. Therefore it is necessary to find a suitable optimization method which can find optimum values of cutting parameters for minimizing surface roughness. The turning ...

In this study, ultrasonic assisted machining (UAM) technique is applied in side-surface milling experiment for glass-ceramic workpiece material. The tungsten carbide cutting-tool with diamond coating is used in conjunction with two kinds of cooling/lubrication mediums such as water-soluble (WS) cutting fluid and minimum quantity lubricant (MQL). Full factorial process parameter combinations on ...

In this paper, we propose the problem of optimizing multivariate performance measures from multi-view data, and an effective method to solve it. This problem has two features: the data points are presented by multiple views, and the target of learning is to optimize complex multivariate performance measures. We propose to learn a linear discriminant functions for each view, and combine them to ...

the drilling is well known as one of the most common hole making processes in the industry.due to close tolerance requirement for drilled holes in the most of work pieces, onlinecontrolling of the diameter of drilled holes seems to be necessary. in the current work, an onlinedimensional controlling system was developed for drilling process. doing this, drilling processwas executed in different ...

ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...

The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...

Estimation and modeling of soft tissue deformation during cutting is important for developing a reality based haptic interaction model for surgical training and simulation. In this paper, we are interested in understanding the effect of parameter changes, such as the cutting speed and the angle of cutting, to develop a predictive model that is self consistent with the experimental observations....

This work presents a new criterion for the tool wear evaluation from cutting tool vibration. The vibratory signatures produced during a dry turning process were acquired using a three-axis accelerometer mounted on cutting tool. Then, the mean power analysis was estimated to extract an indicator parameter able to describe the wear of the cutting tool along its lifespan. Finally, a criterion base...

This work proposes a process planning for machining of a Floor which is the most prominent elemental machining feature in a 21⁄2D pocket. Traditionally, the process planning of 21⁄2D pocket machining is posed as stand-alone problem involving either tool selection, tool path generation or machining parameter selection, resulting in sub-optimal plans. For this reason, the tool path generation and...