The aim of this study was to determine the optimal cutting cycle in an uneven-aged beech forest in the North of Iran. First of all, a logistic growth model was determined for an uneven aged forest. Then, the stumpage price was predicted via an autoregressive model. The average stumpage price of beech was derived from actual timber, round wood, fire and pulpwood prices at road side minus the var...

Power reciprocating saws are used in surgical procedures to cut bone. Improved cutting rates are desirable in order to reduce operative time and improve patient outcome. A fixture was developed to test the effect of blade speed on cutting rate of bovine cortical bone. It was hypothesized that the volumetric cutting rate would increase in a linear manner for a fixed stroke length and a constant ...

The laser cutting parameters are dependent on the beam characteristics, the cutting rate required, the composition and thickness of the material to be cut, and the desired cut edge quality. The laser cutting process and cut quality depend upon the proper selection of laser and workpiece parameters. Deficiencies in cutting quality may be related to the slow process drifts and disturbances that a...

Manufacturing process frequently employs optimization of machining parameters in order to improve product quality as well as to enhance productivity. The material removal rate is a significant indicator of the productivity and cost efficiency of the process. Taguchi method has been implemented for assessing favorable (optimal) machining condition during the machining of nylon by considering thr...

Two types of alumina-based cutting tools with compositions of 90 vol.% Al2O3+10 vol.% ZrO2 and 80 vol.% A12O3+20 vol.% TiC are produced by isostatic pressing and sintering technique. The effects of these additives on the mechanical properties and cutting performance of these materials are investigated. The tool life in both materials is examined under identical conditions on cutting a grey cast...

In this study, the effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and resultant forces in the finish hard turning of AISI H13 steel were experimentally investigated. Cubic boron nitrite inserts with two distinct edge preparations and throughhardened AISI H13 steel bars were used. Four-factor (hardness, edge geometry, feed rate and cutting ...

The aim of this paper is to investigate the effect of cutting speed and uncut chip thickness on cutting performance. A Finite Element Method (FEM) based on the ABAQUS explicit software which involves Johnson-Cook material mode and Coulombs friction law was used to simulate of High Speed Machining (HSM) of AISI 1045 steel. In this simulation work, feed rate ranging from 0.05 mm/rev to 0.13 mm/re...

This article examined the impact of cutting speed and feed rate on process cross with a saw chain. Three speeds three rates were chosen, their energy intensity was evaluated. The measurements performed an experimental device, which it is possible to set rpm (cutting speed) into section using frequency converters. influences resulting efficiency, at (vc) 5.02 m × s-1 power (P) 485 W. With increa...

this paper presents the findings of experimental investigations into the effects of cutting speed, feed rate, depth of cut and approach angle on the machinability of titanium (grade-5) alloy. also the comparison for the two different cutting materials inserts polycrystalline diamond (pcd) and cubic boron nitride (cbn) with similar tool geometry for similar machining parameters is also carried o...