Abstract: In this paper a new topology of high step-down dc-dc converter is proposed. The proposed converter uses an interleaved structure with one phase using a traditional buck converter and the second phase uses its inverted version. By this technique a high step down voltage conversion can be achieved as compared to the traditional interleaved buck converter. Operating principle and steady ...

DC motor widely used-high precision digital controls. Speed control of dc motor is achieved with smooth starter by using buck converter. Hard switching causes unsatisfactory dynamic behaviour produces abrupt variations in the V & I of the motor overcome by dc-dc buck power converter by PI controller. A separately excited dc motor is used for this simulation. The proposed system with PI control ...

This paper proposes an improved control method based on modified Delta-Sigma Modulator (DSM) to enhance transient response and improve harmonic contents of buck DC-DC converter. The main advantages of the proposed method are improving the output voltage frequency spectrum, correction of the output voltage harmonic contents and sideband harmonics, reduction of switching noise peaks at the output...

This paper presents development of an optimal control strategy for a hybrid photovoltaic/battery energy storage (PV/BES) system. The fluctuations at the DC bus voltage due to voltage sag were mitigated by using charge/discharge capability of the BES through the DC/DC buck/boost converter. Furthermore, an optimization of system control parameters responsible for DC bus voltage regulation within ...

─The suitability of a single-stage ac-dc buck-boost converter for low-voltage applications is investigated. Indepth discussion and analysis of the converter’s operating principle, basic relationships that govern converter steadystate operation, and details of the necessary control structures needed to comply with the grid code are provided. The validity of the proposed system is confirmed using...

Reduced switching loss favours Pulse Skipping Modulation mode of switching dc-to-dc converters at light loads. Under certain conditions the converter operates in discontinuous conduction mode (DCM). Inductor current starts from zero in each switching cycle as the switching frequency is constant and not adequately high. A DC-to-DC buck converter is modelled and simulated in this paper under DCM....

This paper presents comparative performance between Analog and digital controller on DC/DC buck-boost converter four switch. The design of power electronic converter circuit with the use of closed loop scheme needs modeling and then simulating the converter using the modeled equations. This can easily be done with the help of state equations and MATLAB/SIMULINK as a tool for simulation of those...

This paper presents the functions of Series-Loaded Resonant Converter (SLRC). Series Loaded Resonant DC-DC converter is a type of soft-switching topology widely known for providing improved efficiency. Zero voltage switching (ZVS) buck converter is more preferable over hard switched buck converter for low power, high frequency DC-DC conversion applications. Zero Voltage switching techniques wil...

This work presents the analysis of radiated EMI problems associated with DC-DC buck converters and the solutions for minimize the reverse recovery of the Drain-Bulk diode of the synchronous switching MOSFET. The DC-DC buck converter topology is used in computers and telecom applications because of its high power efficiency and multiple DC levels. For reducing the reverse recovery and its relate...

Abstract – Resonant parametric perturbation (RPP) method is an effective non-feedback method for controlling chaos. In this paper, the above method is applied for the current programmed buck-boost dc-dc converter which exhibits chaotic for wide parameter variations. The different possible operating regimes leading to chaotic operation of the current mode controlled buck-boost converter is discu...