The aim of this study was to assess the effects of partial carbon or glass fiber reinforcement on the flexural properties of All-on-Four provisional fixed denture base resin. The carbon or glass fibers were woven (3% by weight) together in three strands and twisted and tightened between the two abutments in a figure-of-"8" pattern. Four types of specimens were fabricated for the three-point loa...

OBJECTIVE The shear bond strengths of two hard chairside reline resin materials and an auto-polymerizing denture base resin material to cast Ti and a Co-Cr alloy treated using four conditioning methods were investigated. MATERIAL AND METHODS Disk specimens (diameter 10 mm and thickness 2.5 mm) were cast from pure Ti and Co-Cr alloy. The specimens were wet-ground to a final surface finish of 6...

The purpose of this study was to investigate the influence of the surface roughness of denture base resin and metal on wettability with water and saliva. Solid specimens were produced using heat-curing denture base resin and Co-Cr alloy. After polymerizing or casting these materials, specimens with four different types of surface roughness were produced by a progressive polishing process using ...

The aim of this study was to investigate the clinical outcome of removable partial dentures (RPDs) designed to minimize denture mobility during function. Using archived files of the undergraduate program between 2003 and 2005 at Tokyo Medical and Dental University, a list of 169 patients treated with 184 RPDs was created. The RPDs had either an acrylic resin-base or a cobalt-chrome framework-ba...

o bjectives: heat-polymerized acrylic resin has been the most commonly used denture base material for over 60 years. however, the mechanical strength of acrylic resin is not adequate for long-term clinical performance of dentures. consequently, fracture is a com- mon clinical occurrence, which often occurs in the midline of denture base.this study aimed to evaluate the efficacy of cold cure and...

STATEMENT OF PROBLEM Clinical studies comparing the retention values of milled denture bases with those of conventionally processed denture bases are lacking. PURPOSE The purpose of this clinical study was to compare the retention values of conventional heat-polymerized denture bases with those of digitally milled maxillary denture bases. MATERIAL AND METHODS Twenty individuals with complet...

objective: studies have demonstrates that physical properties of denture base affect patient satisfaction and acceptance. thermal conductivity is among the most important properties of denture base influencing the sense of taste and gingival health. the conventionally used acrylic resin has a low coefficient of thermal conductivity. this study aimed to improve the thermal conductivity of acryli...

  Objective: Studies have demonstrates that physical properties of denture base affect patient satisfaction and acceptance. Thermal conductivity is among the most important properties of denture base influencing the sense of taste and gingival health. The conventionally used acrylic resin has a low coefficient of thermal conductivity. This study aimed to improve the thermal conductivity of acry...

There are several benefits in using adhesive technique in removable prosthodontics as well as fixed prosthodontics. Previous studies have examined denture-base surface treatments that improve bond strength between a denture base resin and autopolymerizing repair resin. Dichloromethane and ethyl acetate are organic solvents that swell the denture base surface, thereby permitting diffusion of the...

Purpose: Acrylic dentures frequently fracture during service due totheir poor strength characteristics. The aim of this study was to evaluate the effects of adding 5%, 10% and 15% aluminum oxide powder on the flexural strength, surface hardness of a conventional heat-polymerized acrylic resin. Materials and methods: One of the commonly used conventional heat cure denture base resin (DPI) and hi...