In order to directly control the premixed combustion phasing, a Jet Controlled Compression Ignition (JCCI) for diesel premixed compression ignition systems is investigated. Experiments were conducted on a single cylinder natural aspirated diesel engine without EGR at 3000 rpm. Numerical models were validated by load sweep experiments at fixed spark timing. Detailed combustion characteristics we...

This work intends to capitalize waste transformer oil (WTO) as a renewable source of fuel in a diesel engine, given the cost of fuel being used is reduced when using waste products. Previously, despite its higher viscosity, WTO is used as such or in blends with diesel in a diesel engine. However, in the current study, efforts are taken to chemically treat WTO so as to bring down its viscosity a...

For countries, which produce oil crops, vegetable oil is a potential source of alternative fuel. Over the years there have been many attempts to use various types of vegetable oil directly in diesel engines. These include palm oil, soybean oil, sunflower oil, safflower oil, coconut oil, rapeseed oil, jatropha oil etc. Crude Palm Oil (CPO) is one of the promising renewable bio-fuels. Many resear...

The present study analyzes the heat release and combustion characteristics of diesel, pure biodiesel (B100) obtained from Jatropha oil and its 80% blending with Ethanol (BD80E20) and Acetone (BD80AC20) as fuels in a single cylinder four stroke direct injection (DI) diesel engine. The analyses of experimental results indicate that the pressure of the in-cylinder gases rise early in case of B100,...

The soot formation processes of conventional and low temperature diesel combustion were investigated by a newly developed Forward Illumination Light Extinction (FILE) soot measurement technique in a constant volume spray chamber. The FILE technique has the capability to obtain two-dimensional time-resolved quantitative soot measurements. For diesel combustion at conventional ambient condition, ...

Whereas previous emission limit values could be met by primary engine control measures, the limits for PM and NOx from heavy duty engines in 2008/09 (Euro V) and diesel passenger cars in 2014/15 (Euro 6) represent a challenge for the developers of diesel engines and vehicles. Due to the thermodynamics of the Diesel combustion process, it is difficult to optimise the combustion process for both ...

This work is carried out to investigate combustion characteristics of a dual fuel (diesel-gas) engine at part loads, using a quasi-dimensional multi zone combustion model (MZCM) for the combustion of diesel fuel and a single zone model with detailed chemical kinetics for the combustion of natural gas fuel. Chemical kinetic mechanisms consist of 184 reactions with 50 species. This combustion mod...

To elucidate the relationship between physicochemical properties, spray characteristics, and combustion performance, a series of experiments have been conducted in a constant volume vessel with injection of hydrous ethanol diesel emulsion and regular diesel. HE30 (emulsion with 30% volume fraction of 20% water-containing ethanol and 70% volume fraction of 0# diesel) is developed using Shah’s te...

Homogeneous charge compression ignition (HCCI) is an advanced combustion concept that is developed as an alternative to diesel engines with higher thermal efficiency along with ultralow NOx and PM emissions. To study the performance of this novel technique, experiments were performed in a two cylinder engine, in which one cylinder is modified to operate in HCCI mode while other cylinder operate...