نتایج جستجو برای: dissimilar resistance spot welding
تعداد نتایج: 432459 فیلتر نتایج به سال:
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
this paper aims at investigating the effects of weld nugget size and expulsion on the mechanical properties of low carbon steel resistance spot welds using tensile-shear test. mechanical performance of spot welds are described in terms of failure mode, peak load and failure energy obtained from the tensile-shear test. the effects of voids and porosity as well as electrode indentation associated...
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
Weldability of high carbon steels due to the high percentage of carbon and consequently formation of martensitic structure is very poor. In this research, resistance spot welding of eutectoid high carbon steel 1075 is experimentally and numerically investigated from various points of view. The effect of welding current as one of the most effective parameters on failure mode, mechanical properti...
Weldability of high carbon steels due to the high percentage of carbon and consequently formation of martensitic structure is very poor. In this research, resistance spot welding of eutectoid high carbon steel 1075 is experimentally and numerically investigated from various points of view. The effect of welding current as one of the most effective parameters on failure mode, mechanical properti...
This study aims to calculate the resistance spot welding current digitally at a fast speed. The conventional open-loop spot welding machine cannot measure the current, thus the welding quality varies. The welding time of spot welder is very short, but the welding current is strong and it is hard to be measured, thereby resulting in the uncontrollability of welding quality. This study uses a hig...
Introduction: Risk assessment of Toxic or hazardous chemicals enables the Industrial Hygienists to make the appropriate decision in providing healthy work place. This project was conducted in an assembling plant,(4workshop) of an Automobile Industry in IRAN with 2 types of welding operations, including GMAW (CO2 welding) and Spot resistance welding operations. . Method and Materials: Welders...
Abstract In this publication, cold gas spraying (CGS) is investigated as an enabler for aluminum-steel joints. Using a powder-based coating process to adhere steel layer aluminum substrate allows component be welded the deposited by resistance spot welding. This method permits metallurgical connection between similar materials separated, while mechanical bonding ensures at dissimilar aluminum-t...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید